Clarion CX400 Owner's Manual page 26

Operations Common to Each Mode
Mode Number of titles
CD mode
50 titles
TV mode 20 titles
Radio mode 30 titles
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for CD, CD changer,
Radio stations and TV stations. The number of
titles that can be entered for each mode are as
follows.
AUX function
This system has an external input jack on the
front panel so you can listen to sounds and
music from external devices connected to this
unit.
• Selecting AUX IN sensitivity
Make the following settings to select the
sensitivity when sounds from external devices
connected to this unit are difficult to hear even
after adjusting the volume.
*
The factory default setting is "MID".
1. Press and hold the (DISP] button for 1
second or longer.
2. Press the
(~]
or
(~~]
button to select
"AUXSENS".
3.
Press the
LA]
or
(T]
button to select
"HIGH", "MID" or "LOW".
Note:
When the AUX mode is selected, setting AUX IN
sensitivity is available.
4. Press the
(~~:]
button.
The display switches to the title input display.
5. Press and hold the [BND] button for 1
second or longer.
All characters in the title disappear.
6.
Press and hold the
[~NI:]
button for
2
seconds
or longer to store the setting.
Clearing titles
1. Select and playa CD in the CD changer or
tune in to a TV station or Radio for which you
want to clear the title.
2. Press and hold the [DISP] button for 1
second or longer.
3. Press the
(~]
or
(~~]
button to select
"TITLE INPUT".
100 titles
Number of titles CD changer mode
DCZ62S connected
1. Press the [SRC] button to select the mode
you want to enter a title (Radio, CD, CD
changer or TV).
2. Select and playa CD in the CD changer or
tune in to a TV station or Radio for which you
want to enter the title.
3. Press and hold the [DISP] button for 1
second or longer.
4. Press the
[~
.... ] or
[~~]
button to select
"TITLE INPUT".
5. Press the
[~~:]
button.
The display switches to the title input display.
6.
Press the
[~]
or
[~~]
button to move the
cursor.
7. Press the [BND] button to select a character
type. Each time you press the [BND] button,
the character type changes in the following
order:
Capital letters
~
Numbers
~
Symbols
~
Capital letters ...
8. Press the
LA]
or
[T]
button to select the
desired character.
9. Repeat steps 6 to 8 to enter up to 10
characters for the title.
10. Press and hold the
(~~:]
button for 2 seconds
or longer to store the title into memory.
26
CX400
Operations Common to Each Mode
Mode Number of titles
CD mode
50 titles
TV mode 20 titles
Radio mode 30 titles
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for CD, CD changer,
Radio stations and TV stations. The number of
titles that can be entered for each mode are as
follows.
AUX function
This system has an external input jack on the
front panel so you can listen to sounds and
music from external devices connected to this
unit.
• Selecting AUX IN sensitivity
Make the following settings to select the
sensitivity when sounds from external devices
connected to this unit are difficult to hear even
after adjusting the volume.
*
The factory default setting is "MID".
1. Press and hold the (DISP] button for 1
second or longer.
2. Press the
(~]
or
(~~]
button to select
"AUXSENS".
3.
Press the
LA]
or
(T]
button to select
"HIGH", "MID" or "LOW".
Note:
When the AUX mode is selected, setting AUX IN
sensitivity is available.
4. Press the
(~~:]
button.
The display switches to the title input display.
5. Press and hold the [BND] button for 1
second or longer.
All characters in the title disappear.
6.
Press and hold the
[~NI:]
button for
2
seconds
or longer to store the setting.
Clearing titles
1. Select and playa CD in the CD changer or
tune in to a TV station or Radio for which you
want to clear the title.
2. Press and hold the [DISP] button for 1
second or longer.
3. Press the
(~]
or
(~~]
button to select
"TITLE INPUT".
100 titles
Number of titles CD changer mode
DCZ62S connected
1. Press the [SRC] button to select the mode
you want to enter a title (Radio, CD, CD
changer or TV).
2. Select and playa CD in the CD changer or
tune in to a TV station or Radio for which you
want to enter the title.
3. Press and hold the [DISP] button for 1
second or longer.
4. Press the
[~
.... ] or
[~~]
button to select
"TITLE INPUT".
5. Press the
[~~:]
button.
The display switches to the title input display.
6.
Press the
[~]
or
[~~]
button to move the
cursor.
7. Press the [BND] button to select a character
type. Each time you press the [BND] button,
the character type changes in the following
order:
Capital letters
~
Numbers
~
Symbols
~
Capital letters ...
8. Press the
LA]
or
[T]
button to select the
desired character.
9. Repeat steps 6 to 8 to enter up to 10
characters for the title.
10. Press and hold the
(~~:]
button for 2 seconds
or longer to store the title into memory.
26
CX400