Removing The Rack Door - HP BladeSystem c7000 Setup And Installation Manual

1. Using heavy-freight-handling equipment, move the shipping pallet as close as possible to the
planned installation area.
2. Unscrew the screws in the base.
3. Unfasten the metal clips and dispose of them.
4. Remove the side and top panels.

Removing the rack door

To provide access to all sides of the rack while you are installing the various components, first
remove the rack doors.
To remove the rack door:
1. Open the door
a. Insert the key in the lock and turn it one quarter turn counterclockwise.
b. Remove the key. You will not be able to open the latch before removing the key.
c. Lift the latch.
d. Twist the latch one quarter turn and pull the door open.
2. For the seismic rack: Using a Phillips driver, disconnect the ground cable from the door.
For the seismic rack R2: Using a 10-mm socket wrench, disconnect the ground cable from the
door:
18 Installation