Side Burner Troubleshooting - Weber Summit Gold D LP Owner's Manual

Side Burner Troubleshooting

Problem
Side Burner does not light.
Flame is low in HIGH position.
Push button ignition does not
work.
Side Burner maintenance
WARNING: All gas controls and supply valves
should be in the OFF position.
(2)
Make sure wire is connected between igniter and
electrode. Check that igniter lock nut is tight.
Note: If the igniter works loose, carefully tighten the
igniter lock nut with an adjustable wrench or pliers.
Adjust igniter electrode to burner. Gap should be 1/8 to
3/16 inch from tip of electrode to burner. Spark should
be a white/blue color, not yellow.
Check
Is gas supply off?
Is the fuel hose bent or kinked?
Does burner light with a match?
(1)
Side Burner Ring & Head
D-14
Cure
Turn supply on.
Straighten hose.
If match lights burner, checkigniter
(see below).
1) Igniter Wire
2) Venturi/Burner
3) 1/8 to 3/16 inch gap between electrode and burner
Side Burner Grate
Side Burner Cap
Igniter Electrode
Control Knob
(3)