Compliance With Standards - Philips AT941 User Manual

Hide thumbs Also See for AT941:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Charging time
Shaving minutes
60 min.
AT941
AT940
Caution
-
Never use water hotter than 80°C to rinse the shaver.
-
Be careful with hot water. Always check if the water is not too hot, to
prevent your hands from getting burnt.
-
The shaver and the other accessories are not dishwasher-proof.
-
Water may leak from the socket at the bottom of the shaver when you
rinse it. This is normal and not dangerous because all electronics are
enclosed in a sealed power unit inside the shaver.
-
Do not use the shaver, adapter, charging stand or any other part if
it is damaged, as this may cause injury. Always replace a damaged
adapter or charging stand with one of the original type.
-
Use, charge and store the appliance at a temperature between 10°C
and 35°C.
-
Always place and use the shaver on a surface that is fluid-resistant.
-
Only use the adapter, charging stand and accessories supplied.
-
Always put the protection cap on the shaver to protect the shaving
heads when you are travelling.
-
If the shaver is subjected to a major change in temperature, pressure or
humidity, let it acclimatise for 30 minutes before you use it.
-
Do not immerse the charging stand in water or any other liquid, nor
rinse it under the tap.

Compliance with standards

-
This Philips appliance complies with all applicable standards and
regulations regarding electromagnetic fields (EMF).
General
-
The appliance is equipped with an automatic voltage selector and is
suitable for mains voltages ranging from 100 to 240 volts.
-
The adapter transforms 100-240 volts to a safe low voltage of less than
24 volts.
Charging
Note: The shaver cannot be used directly from the mains.
When you charge the shaver for the first time or after a long period of
disuse, let it charge until the charging light lights up continuously.
See the table below for the charging time of your shaver.
1 hour
AT941, AT940, AT897
AT894, AT891
AT890, AT811
The shaving time may be less than stated below in the table as a result of
your shaving behaviour, your cleanings habits or your beard type.
50 min.
AT897, AT894, AT891
AT890, AT811
ENGLISH
8 hours
AT899, AT896, AT756
AT753, AT751, AT750
45 min.
40 min.
AT899
AT756, AT753
AT896
AT751, AT750
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents