Compliance With Standards - Philips AT891 Instruction Manual

English
8
- If the shaver is subjected to a major change
in temperature, pressure or humidity, let
it acclimatise for 30 minutes before you use it.

Compliance with standards

- This shaver complies with the internationally
approved safety regulations and can be safely used
in the bath or shower and cleaned under the tap.
- This Philips appliance complies with all standards
regarding electromagnetic fields (EMF). If handled
properly and according to the instructions in this
user manual, the appliances are safe to use based
on scientific evidence available today.
general
- The appliance is equipped with an automatic
voltage selector and is suitable for mains voltages
ranging from 100 to 240 volts.
- The adapter transforms 100-240 volts to a safe
low voltage of less than 24 volts.
Charging
Note: The shaver cannot be used directly from the
mains.
AT891: It takes approx. 1 hour to fully charge the
shaver.
AT751: It takes approx. 8 hours to fully charge the
shaver.
When you charge the shaver for the first time or
after a long period of disuse, let it charge until the
charging light lights up continuously.
A fully charged shaver provides up to 17 (AT891) or
14 (AT751) cordless shaves.
The shaving time may be less than 17 (AT891) or 14
(AT751) cordless shaves as a result of your shaving
behaviour, your cleaning habits or your beard type.