Software; Software Information; Software Update - Philips HDR5750 User Manual

9. SOFTWARE

Software

Software Information

You can check the Software Version currently installed on this
Unit.
1.
Press [ (home) ], then select "Setup"
"Software" "Software Information", using
[ / / / ], then press [ OK ].
Setup
Software Information
Video / Audio

Software Update

Display
Automatically Check for
Netflix Deactivation
HDMI
Netflix ESN
Playback / Recording
VUDU Deactivation
Network
YouTube Deactivation
Software
Digital Rights mgmt
Other
• Press [ (home) ] Repeatedly to Exit.
Software Update
This unit lets you Update the Software yourself using a USB
Memory Stick or via the Internet.
■
USB Memory Stick Update
Prepare a blank USB Memory Stick for Software Update.
Access www.philips.com and Download the latest Version
Software to a Blank USB Memory Stick using a PC by
following the Directions described on the Website.
• Use a Blank USB Memory Stick, Download the
Software on your PC and Write the Software in the
Root Directory of the USB Memory Stick.
• For more details on how to Download the Software,
please refer to the Website.
1.
Press [
"Software"
using [
PHL-0DVR_100_0
• The Root Directory of the USB Memory Stick will be
2.
Select the Software using [
press [ OK ].
• Confirmation Message will appear.
3.
Select "Yes" using [
[ OK ].
• Software Update will Start.
• Message will Appear upon Success.
4.
Remove the USB Memory Stick and Restart
this Unit.
Caution
• Please Do Not Unplug the AC Power Cord, Disconnect
the USB Memory Stick or press [
Turn the unit into Standby mode while Performing a USB
Memory Stick Update.
Note(s)
• Software Update Will Not Change any of the current
Settings.
• After the Software Update, the Statement displayed on
the Screen may not be the same between the Unit and
User manual.
(home) ], then select "Setup"
"Software Update"
/ / / ], then press [ OK ].
displayed. Only Software Files with the Extension of
".upg" will appear in the List.
/
Software Update is in progress. Please wait.
Do not remove the USB storage device or turn this Unit Off
while Update is in progress.
Update this Unit with new Software.
Continued on next page.
"USB",
/ ], then
], then press
(Power-ON) ] to
EN - 47