Philips HDR5750 User Manual page 53

IP Configuration
IP Setting Mode
1.
Press [ (home) ], then Select "Setup"
"Network" "Manual Network Settings",
then press [ OK ].
2.
Select "IP Configuration" using
[ / / / ], then press [ OK ].
3.
Select "IP Setting Mode" using [
then press [ OK ].
• You will be asked to Select "Auto" or "Manual".
IP Setting Mode: Auto
"Auto" will Automatically Configure the IP Setting.
4.
Select "Auto" using [
[ OK ].
• Please Move on to 'DNS Setting Mode'.
IP Setting Mode: Manual
"Manual" lets you Manually Configure the IP Setting.
4.
Select "Manual" using [
[ OK ]. Select "IP Address" using [
then press [ OK ].
• IP Address Entry Cells will appear.
5.
Enter an IP Address using [
Number buttons ].
Setup
IP Setting Mode
Network Selection
IP Address
Wireless Network Setting
Subnet Mask
IP Configuration
Default Gateway
Proxy Configuration
Primary DNS
Secondary DNS
MAC Address
• Enter an IP Address after checking the Specifications of
your Router.
• If an IP Address is Unknown, check the IP Address of
other Devices (e.g. PC connected with a LAN cable).
Then, in the Cell to the far right, assign a Different
Number from those other Devices.
6.
Press [ OK ] when at the Cell to the far
right.
• Please Move on to 'Subnet Mask'.
/ ],
/ ], then press
/ ], then press
/ ],
/ ] or [ the
0 . 0 . 0 . 0
DNS Setting Mode
5.
Select "DNS Setting Mode" using [
then press [ OK ].
• You will be asked to select "Auto" or "Manual".
DNS Setting Mode: Auto
6.
Select "Auto" using [
[ OK ].
• Please Move on to 'Proxy Configuration' if your
ISP (Internet Service Provider) requires Proxy
Configuration. Otherwise, Move on to 'Connection
Test'.
DNS Setting Mode: Manual
6.
Select "Manual" using [
[ OK ].
• Please Move on to 'Primary DNS'.
Subnet Mask
7.
Select "Subnet Mask" using [
press [ OK ].
• Subnet Mask Entry Cells will appear.
8.
Enter the Subnet Mask using [
[ the Number buttons ].
Setup
IP Setting Mode
Network Selection
IP Address
Wireless Network Setting
Subnet Mask
IP Configuration
Default Gateway
Proxy Configuration
Primary DNS
Secondary DNS
MAC Address
• Enter the Subnet Mask after checking the Specifications
of your Router, then Enter the Same Numbers in the
Cells.
9.
Press [ OK ] when at the Cell to the far
right.
• Please Move on to 'Default Gateway'.
/ ],
/ ], then press
/ ], then press
/ ], then
/ ] or
0 . 0 . 0 . 0
Continued on next page.
EN - 53