Table of Contents
Advertisement
Manual Network Settings
1.
Press [
(home) ], then select "Setup"
"Network"
"Manual Network Settings",
then press [ OK ].
Setup
Network Selection
Network Settings Assistant
Wireless Network Setting
Manual Network Settings
IP Configuration
Connection Test
Proxy Configuration
Setting Status
■
For Wireless Connection
2.
Select "Network Selection" using [
then press [ OK ].
3.
Select "Wireless" using [
[ OK ].
4.
Select "Wireless Network Setting" using
[
/
], then press [ OK ].
You will be asked to Select "Auto" or "Manually Enter Your
SSID". Select an adequate Method according to your Wireless
Router and Settings.
Auto
5.
Select "Auto" using [
[ OK ].
• Access Points List will be Displayed.
Setup
Router1
Auto
Router2
Manually Enter Your SSID
Router3
Router4
Router5
Router6
Router7
Router8
appears next to the SSID (Access Point) that is
Protected with Security.
shows the Access Point's Signal Strength.
EN - 52
Wireless
• Auto
• IP Setting Mode
• Proxy Setting
/
],
/
], then press
/
], then press
• Enter Key
• Select
• Enter Key
• Enter Key
• Enter Key
• Start Now
• Enter Key
• Enter Key
6.
Select an Access Point to which you wish to
Connect this Unit using [
[ OK ].
If you select an Access Point with "Enter Key", "Start
Now", or "Select"...
For "Enter Key": WEP / WPA / WPA2 key entry Screen will
6
9
appear. Refer to Step
to
in 'Manual' on page 50.
For "Start Now": Connection Test will Start. If Connection Test
passes, press [ OK ] to Complete the Network Setup, then
press [
(home) ] Repeatedly to Exit.
For "Select": WPS Connection Method Screen will appear. Refer
to Step
4
to
9
on page 50.
Manually Enter Your SSID
5.
Select "Manually Enter Your SSID" using
[
/
], then press [ OK ].
• SSID Entry Screen will appear.
6.
Enter the SSID using the On screen
Keyboard.
• For details on how to use the On screen Keyboard,
refer to 'Guide to the On Screen Keyboard' on page 45.
7.
Select "OK" using [
press [ OK ].
• Confirmation Message will appear.
8.
Select "Yes" using [
[ OK ].
9.
Press [ OK ] on the SSID.
• List of Security Methods will be Displayed.
10.
Select an adequate Security Method using
[
/
], then press [ OK ].
If you Select "None"...
Connection Test will Start. If Connection Test passes, press [ OK ]
to Complete the Network Setup, then press [
Repeatedly to Exit.
If you select "WEP" or "WPA/WPA2"...
WEP / WPA / WPA2 Key Entry Screen will appear. Refer to
6
9
Steps
to
in 'Manual' on page 50.
■
Wired Connection
Refer to 'For Wired Connection' on page 51.
/
], then press
/
/
/
], then
/
], then press
(home) ]
Continued on next page.
Advertisement
Table of Contents
