Table of Contents
Advertisement
Quick Links
Register your product and get support at
www.philips.com/support
EN User Manual
ES
Manual del Usuario
FR
Manuel d'Utilisation
EN
For further assistance, call the customer support service in your
country.
•
To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S.
Virgin Islands, contact Philips Customer Care Center at 1-866-310-
0744
ES
Pour obtenir de l'aide supplémentaire, communiquez avec le centre
de service à la clientèle de votre pays.
•
Pour obtenir de l'aide aux États-Unis, au Canada, à Puerto Rico ou aux
Îles Vierges américaines, communiquez avec le centre de service à la
clientèle Philips au: 1-866-310-0744
Para obtener más información, llame al servicio de soporte al cliente
FR
de su país.
•
Para obtener asistencia en los Estados Unidos, en Canadá, Puerto Rico
o en las Islas Vírgenes de los Estados Unidos, comuníquese con Centro
de atención al cliente de Philips a 1-866-310-0744
HDR5750
HDR5710
Advertisement
Table of Contents
Related Manuals for Philips HDR5750
Summary of Contents for Philips HDR5750
- Page 1 • To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S. Manual del Usuario Virgin Islands, contact Philips Customer Care Center at 1-866-310- Manuel d’Utilisation 0744 Pour obtenir de l’aide supplémentaire, communiquez avec le centre de service à la clientèle de votre pays.
-
Page 2: Safety Information
Register online at www.productrecords.com/phl today to get the very most from your purchase. Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don’t miss out. Register online at www.productrecords.com/phl to ensure: * Product Safety Notification * Additional Benefits By registering your product, you’ll receive... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Read these instructions. 10. Protect the power cord from being walked on or Keep these instructions. pinched particularly at plugs, convenience receptacles, Heed all warnings. and the point where they exit from the apparatus. Follow all instructions. 11. -
Page 4: Maintenance
• If this unit becomes inoperative, do not try to correct the problem on your own. There are no user-serviceable parts inside. Disconnect the USB-HDD or USB Memory Stick (if connected to the unit), place the unit into Standby mode, unplug the AC power plug, and please contact: 1-866-310-0744 or visit : www.philips.com/support ■ Cleaning the cabinet •... -
Page 5: Notice
Important Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don’t miss out. Register online at www.productrecords.com/phl to ensure: Product Safety Notification By registering your product you receive notification - directly from the manufacturer - in the rare case of a product recall or safety defect. -
Page 6: License
LICENSE Trademark Information This product includes some open source software that is subject to the GNU General Public License (GPL), GNU Lesser General Public License (LGPL) and/or copyright licenses, disclaims and notices. You can confirm further information about these by pressing [ (home) ], then select “Setup”... -
Page 7: Table Of Contents
Table of Contents 1. INTRODUCTION 4. VIEWING TV Safety Information ......... 2 While Viewing TV ........ 24 Maintenance..................4 Channel Selection ..............24 Notice ....................5 Channel List ..................24 Warranty ....................5 Detailed Information on the Program.....24 Important ...................5 Audio Languages ...............24 Environmental care ..............5 Closed Caption ................. - Page 8 6. RECORDING 9. SOFTWARE Information on Recording ....32 Software ..........47 Guide to Display ................32 Software Information ............47 Software Update ..............47 Before Recording ........33 Automatically Check for Latest Software ....48 Setting for Auto Chapter ...........33 Basic Recording & 10.
-
Page 9: Features
LAN Terminal / Internal Wireless LAN adapter Recording. Connects the LAN Terminal or Wireless LAN adapter to ■ access the Internet. HDR5750: MAX. 1TB formatted capacity HDD (Internal) ■ Closed Caption decoder This unit is equipped with a 1TB HDD which allows you to Built-in Closed Caption decoder displays text for Closed Record programs for up to a total of 100 HD hours. -
Page 10: Functional Overview
Functional Overview Front Panel (Power-ON) Indicator Infrared Sensor Window Receives IR Signal from your Remote Control so that you REC Indicator can Control the Unit from a distance. Status Indicator Note(s) Power-On REC Indicator Indicates... Indicator (White) (Red) • The REC Indicator will blink in Standby mode if the Clock Solid No Light Power ON... -
Page 11: Remote Control
Using the Remote Control Remote Control Keep in mind the following when using the Remote Control Installing the Batteries in the Remote Control • Make sure that there are No Obstacles between the Remote Control and the Infrared Sensor Window on the Install 2 AAA (1.5V) batteries matching the polarity indicated unit. -
Page 12: Display Button
BACK button • Press to Return to the previously displayed Menu or Screen. • Press to Exit from the various Screen or Window. ( home) button • Press to Display the Home Menu. 10. DISPLAY button • Press to Turn the Display Menu On or Off. 11 INFO button •... -
Page 13: Connections
2. CONNECTIONS Connection ■ Read this First: Disconnect the AC Power cords of this unit, TV and other devices from the AC outlet. Make the Connections as illustrated below. After making All the Connections, connect the AC power cords of the devices. Antenna Connection (Required) Rear of this Unit RF Coaxial... -
Page 14: Connecting To A Tv Using Audio / Video Cables
Connecting to a TV Using Audio / Video cables VIDEO IN RCA Video cable AUDIO IN RCA Audio cable AUDIO VIDEO OUT Rear of this Unit ANTENNA ANTENNA AUDIO AUDIO VIDEO OUT VIDEO OUT HDMI OUT ANT. IN This Connection is for TV Pass ANTENNA Through Only... -
Page 15: Connecting To A Tv Using An Hdmi Cable
Connecting to a TV Using an HDMI cable • HDMI outputs the Video / Audio signals without converting to Analog signals. • No Audio connection is required. • High Speed HDMI cable (also known as HDMI Category 2 cable) is recommended for Better Compatibility. •... -
Page 16: Connecting To A Cable / Satellite Box
Connecting to a Cable / Satellite Box HDMI OUT HDMI cable HDMI IN (not supplied) VIDEO IN RCA Video cable AUDIO IN RCA Audio cable Cable / Satellite Box AUDIO VIDEO OUT ANT.OUT ANT. IN Satellite ANT. IN Rear of this Unit This Connection is Dish for TV Pass Through... -
Page 17: Connecting To A Usb-Hdd
Connecting to a USB-HDD ANTENNA AUDIO VIDEO OUT HDMI OUT AC plug USB cable (Self-powerd (not supplied) USB-HDD only) Note(s) • USB-HDD Registration Screen will appear if you connect Unregistered USB-HDD to this Unit. Please select “Yes” using ], then press [ OK ]. Move on to Step in ‘Registering a USB-HDD’... -
Page 18: Digital Audio Connection
Digital Audio Connection HDMI Audio Connection AV Receiver / Amplifier with an HDMI Input jack Rear of this Unit HDMI OUT HDMI cable ANTENNA (NOT SUPPLIED) HDMI IN AUDIO VIDEO OUT HDMI OUT HDMI OUT Refer to page 70 to set up “HDMI Audio Out”. Dolby Digital Audio format HDMI... -
Page 19: Connection To The Network
Connection to the Network By connecting this unit to the Internet, you can update the Software via the Internet and access network services. Note(s) • For a stable Connection, Wired Connection is recommended when using following Features. (Using following Features with Wi-Fi Connection can be affected by other devices using Radio frequencies.) –... - Page 20 ■ Wi-Fi Router Connection Networking Equipment (Modem, etc.) Wi-Fi Router Internet LAN cable (not supplied) Note(s) • After you made the Wi-Fi Router Connection, set up necessary Network Settings. (For the Network Setting of Wi-Fi Router Connection, refer to ‘Network Settings’ on page 49.) •...
-
Page 21: Initial Setup
3. INITIAL SETUP Initial Setup Before You Start Please follow the instructions below to complete the Initial Setup. While the Welcome Screen is displayed, press [ OK ]. Finding the Viewing Channel on your • ‘Language Setting’ screen will appear. •... - Page 22 Time Zone For “Wired” Connection Select your Time Zone using [ ], then Connection Test will start automatically. Refer to ‘Connection Test’ on page 55. press [ OK ]. After Connection Test, the Test result will be Time adjustment for each Time Zone displayed.
- Page 23 2. C: “Manual” 1 Select “Manual” using [ ], then press [ OK ]. • WEP / WPA Key entry screen will appear. • If your wireless router is not protected by WEP / WPA / WPA2, Connection Test will start automatically. 2 Enter the WEP / WPA / WPA2 key using the On screen Keyboard on screen.
-
Page 24: Viewing Tv
4. VIEWING TV Detailed Information on the Program You can check the information on the TV program that is currently on-air. While Viewing TV Press [ INFO ] while viewing a TV program. Channel Selection 11.1 11.1 KABC KABC A Day of Memories A Day of Memories Select a channel using [ CH +/−... -
Page 25: Closed Caption
Creating or Editing Favorite Channel Group Closed Caption Closed Captioning displays the Audio voice of the TV program Press [ MENU ] while viewing a TV as Text superimposed on TV screen. program. For Digital TV programs, refer to ‘Digital Caption Service’ •... -
Page 26: Installation
5. INSTALLATION Channel Installation Be sure the RF Cable is correctly connected to this Unit and you are registered with your Cable TV provider when you install Guide to the Home Menu Cable Channels. Press [ (home) ] to Display the Home Menu. Then use Press [ (home) ], then select “Installation”... -
Page 27: Weak Channel Installation
Weak Channel Installation Installation Mode This function lets you add the channels that were not added Select “Installation Mode” using [ by “Autoprogram” due to the reception conditions during the then press [ OK ]. Initial Setup. It is only available when you select “Antenna” in “Installation Mode”. -
Page 28: Clock Setup
Clock Setting (Auto) Clock Setup This Unit can set the Time and Date Automatically by referring to a Channel that carries Clock Information. Configure the Clock, Time Zone and Daylight Saving Time Settings. Select “Auto Clock” using [ ], then If the Clock is Not Set Correctly, Timer Recording does Not press [ OK ]. -
Page 29: Audio Setup
Audio Setup Child Lock Configure the Audio Related Settings. You can Prevent Children from Viewing certain types of Programs or Channels by Locking the TV controls using Specific Press [ (home) ], then select “Installation” Ratings. using [ ], then press [ OK ]. Press [ (home) ], then select “Installation”... -
Page 30: Setting Tv And Movie Ratings
Setting TV and Movie Ratings US TV Movie Description Rating Movie Ratings Lock is the Rating System created by MPAA. TV Rating Ratings Lock has controlled access to individual Programs based All Contents on this Rating Including No on their Age and Content Ratings. Rating are Locked None No Rating... -
Page 31: Canadian English / Canadian French Ratings
Canadian English / Canadian French Changing PIN Code Ratings You can set your own PIN Code. You can select ratings for Canadian English / Canadian French (The default PIN Code is 0000.) broadcasting. Press [ (home) ], then select “Installation” Select “Canadian English Rating”... -
Page 32: Recording
6. RECORDING About HDD (Internal HDD) HDD is a special device which has high Recording Density and is suited for Long-time Recording or High-speed Cueing but Information on Recording by contrast, has many factors which can cause breakage. Use HDD on the assumption that you should Dub the Recorded Programs to a USB-HDD to protect your precious Videos. -
Page 33: Before Recording
Before Recording Basic Recording & One-Touch Timer Recording Setting for Auto Chapter Follow the Steps below to Record a TV program. Set the Chapter Interval. When Recording, Chapters will Automatically be created based on this Setting. Note(s) This Setting applies to Normal Recording, One-Touch Recording •... - Page 34 Press [ (Stop) ] to Stop Recording. To Set One-Touch Timer Recording (OTR)... • Confirmation Message will appear. (Recording will be This is a simple way to Set the Recording Time in blocks of continued.) Select “Yes” to Stop Recording. Select “No” 15 Minutes.
-
Page 35: Timer Recording
Enter the Date using [ ], then press Timer Recording (Cursor)]. Timer Programming You can Program the Unit to Record up to 100 Programs WED OCT 23 2013 1:30 PM within a month in advance. Daily or Weekly Program Recordings are also available. - Page 36 Alternate recording (USB-HDD only) To Stop the Timer Recording in Progress In the following cases, the Unit will Detect and Automatically Press [ (Stop) ] on the Remote Control. Record to the HDD even when USB-HDD is selected as the Confirmation Message will appear.
-
Page 37: Hints For Timer Recording
Skip the Timer Recording Period Hints for Timer Recording You can Deactivate the Timer Recording Period (Daily, MON- • If there is a Power Failure or this Unit has been Unplugged SAT, MON-FRI or Weekly) Temporarily. the Clock Setting will be lost. The Timer programming(s) Press [ (home) ], then Select “Timer Programming”... -
Page 38: Dubbing
The Priority of Overlapped Settings Dubbing • A Timer Program which was Set after a Previous Program will be given Priority over a Previous Program when these Timer Programs Overlap. Information on Dubbing • When Timer Programs Overlap, the Timer Recording in Progress will end 15 seconds before the Next Timer You can Dub the Contents of the HDD to USB-HDD or vice Recording Starts. -
Page 39: Selected Title Dubbing
Recording Mode for Dubbing Selected Title Dubbing This Unit is Compatible with the High Speed Dubbing from ■ HDD to USB-HDD or USB-HDD to HDD. Preparing for Dubbing (HDD to USB-HDD or • Duration of High Speed Dubbing will vary depending on USB-HDD to HDD): the Title Amount. - Page 40 Press [ (Cursor)] to Move the Cursor Select “OK” to Set the Titles to be Dubbed. to the Sub Menu and select “OK”. Select whether you wish to “Move” or The Titles will be registered in the Dubbing List. “Copy” a Title from the Dubbing Source when Dubbing Starts.
-
Page 41: Playback
7. PLAYBACK Hint for HDD / USB-HDD Playback With each HDD / USB-HDD Recording, a Separate Title will be created. Titles may be further Subdivided into Chapters. Information on Playback Title 1 Title 2 Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3 Guide to a Title List... -
Page 42: Basic Playback
Basic Playback Special Playback Before starting Playback, make sure that your desired Source Fast Forward / Fast Reverse Playback Device is Selected. • Refer to ‘Switching between HDD Mode / USB-HDD During Playback, press [ (Forward) ] or Mode’ on page 25 for Changing device mode. (Reverse) ]. -
Page 43: Selecting Audio/Video Format
Selecting Audio/Video Format You can Select the Format of Video and Audio as you prefer depending on the Contents of the Title you are Playing back. Switching Audio Languages You can Switch the Audio Language while Playing back a Title Recorded with 2 or more Audio Languages. -
Page 44: Editing
8. EDITING Deleting Multiple Titles You can Delete Titles which you do not need anymore. Please be advised that the Titles once Deleted cannot be brought back. Deleting a Title Press [ TITLE LIST ]. You can Delete a Title which you do not need anymore. Please be advised that the Title once Deleted cannot be •... -
Page 45: Renaming A Title
Renaming a Title Protecting a Title You can protect a Title in order to prevent Accidental Editing. Press [ TITLE LIST ]. Press [ TITLE LIST ]. • Title List will appear. • Title List will appear. Select the desired Title to Rename using ], then press [ MENU ]. -
Page 46: Media Management
Renaming USB-HDD Media Management You can Rename a Registered USB-HDD. Please connect a desired USB-HDD in Advance. Deleting All Recording Data on the Follow Step in ‘Deleting All Recording HDD / USB-HDD Data on the HDD / USB-HDD’ on this page. Recording Data Deleted due to Initialization cannot be undone. -
Page 47: Software
■ USB Memory Stick Update Prepare a blank USB Memory Stick for Software Update. Access www.philips.com and Download the latest Version Software Information Software to a Blank USB Memory Stick using a PC by following the Directions described on the Website. -
Page 48: Automatically Check For Latest Software
■ Network Update Automatically Check for Latest You can Update the Software via the Internet. Be sure that Software you have completed the Network Configuration beforehand. Press [ (home) ], then select “Setup” You can set the Unit to automatically Check for the Latest Version of Software when Unit is connected to the Internet. -
Page 49: 10. Network
10. NETWORK Press the WPS button on your Wireless Router. Return to this Unit within 2 minutes, select This section describes the Procedures for Network Setup. “Connect” using [ ], then press By performing the Network Connection Setup, you can use the Network Features, such as Netflix, VUDU, YouTube™, [ OK ]. - Page 50 Select an Access Point to which you wish to Return to this Unit within 2 minutes, select Connect this Unit using [ ], then press “Connect” using [ ], then press [ OK ]. [ OK ]. • WPS Connection Method Screen will appear. •...
- Page 51 ■ For Wired Connection Manual Entry For Wired Connection, a Network Connection will Select this if you wish to Configure the Wireless Network Automatically be established. Settings manually by entering an SSID and the Security Key. Select “Wired” using [ ], then press Select “Manual Entry”...
- Page 52 Select an Access Point to which you wish to Manual Network Settings Connect this Unit using [ ], then press Press [ (home) ], then select “Setup” [ OK ]. “Network” “Manual Network Settings”, If you select an Access Point with “Enter Key”, “Start then press [ OK ].
- Page 53 IP Configuration DNS Setting Mode IP Setting Mode Select “DNS Setting Mode” using [ then press [ OK ]. Press [ (home) ], then Select “Setup” • You will be asked to select “Auto” or “Manual”. “Network” “Manual Network Settings”, then press [ OK ].
- Page 54 Default Gateway Secondary DNS Select “Default Gateway” using [ Select “Secondary DNS” using [ then press [ OK ]. then press [ OK ]. • Default Gateway Address Entry Cells will appear. • Secondary DNS Address Entry Cells will appear. Enter the Secondary DNS Address using Enter the Default Gateway Address using ] or [ the Number buttons ].
-
Page 55: Usb-Hdd Connection
Enter the Proxy Address using the On USB-HDD Connection screen Keyboard. If you wish to use a USB-HDD, connect a USB-HDD to this • For details on how to use the On screen Keyboard, Unit and Register it. The USB-HDD is Not Ready to use until it refer to ‘Guide to the On Screen Keyboard’... - Page 56 Registering a USB-HDD Deregistering a USB-HDD If you Connect an Unregistered USB-HDD with 32GB to 4TB, Press [ (home) ], then select “Media this Unit Automatically Detects it and prompts you to Register Manager” “USB-HDD Menu” “Register the USB-HDD with the Unit. USB-HDD Setting”...
- Page 57 Disclaimer Important Notes for the Internal HDD and USB-HDD’s • We are not responsible for any damages or injury • This Unit is equipped with an Internal HDD. caused by fire, natural disaster (including earthquakes, • A USB-HDD can be used by Connecting it to this Unit. lightning strikes, etc.), misuse, or use under abnormal •...
-
Page 58: Net Tv
Information on Network Services Net TV For detailed information on the third-party Internet services, please visit each Service Provider’s Website. Netflix: http://www.netflix.com/HowItWorks Before Using Network Services VUDU: http://www.vudu.com/product_overview.html CinemaNow: http://www.cinemanow.com Please follow the Instructions below before using Network Features. Netflix ESN Connect this Unit to the Internet. -
Page 59: 11. Function Setup
11. FUNCTION SETUP List of Settings The following Table has the Information which you can Set and the gray cells are the Default Settings. Refer to the following Table for useful Operations. Menu Items (highlighted in gray is the default) Contents Video / Audio TV Aspect 4:3 Letter Box... - Page 60 Menu Items (highlighted in gray is the default) Contents Display Caption Digital Reset to Default Reset the status of Digital Settings Caption Caption Options. Reset to Default Options Font Style Set the Font Style of the displayed caption. Default Monospaced Serif Serif Monospaced Sans Sans Serif...
- Page 61 Menu Items (highlighted in gray is the default) Contents Display Caption Digital Edge Color Set the Edge Color of the Settings Caption displayed caption. Default Options Black White Green Blue Yellow Magenta Cyan Edge Type Set the edge type of the displayed caption.
- Page 62 Menu Items (highlighted in gray is the default) Contents Network Network Start Now Wireless Easy Connect Set up network connection settings interactively. Settings Scan WPS code Assistant Easy Connect Manual Manual Entry Wired Manual Network Wired Set up network connection settings manually.
- Page 63 Menu Items (highlighted in gray is the default) Contents Other Auto Power Set whether to Turn the unit Off automatically when there is no operation for 3 hours. Remote Code1 Set the Remote Control Code. Control Code2 Initialization Initialize Settings Reset to the default settings.
- Page 64 Menu Items (highlighted in gray is the default) Contents Child Lock Channel Lock Set to Restrict Access on Certain Channels. TV Ratings Set the viewing limitation Lock according to US TV program None ratings. TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA Movie Ratings Set the viewing limitation Lock...
-
Page 65: Setups
Setups Video / Audio ➠ p. 66 In the Setup Menu, you can customize the various kinds of Settings with your Preferences. Adjusting the Video / Audio Mode or some other Refer to the following Instructions to Navigate through the Picture / Sound functions. -
Page 66: Video / Audio
Video / Audio Aspect ratio 16:9 of the video source Select a desired Item using [ ], then press [ OK ]. Setup When “HDMI Video TV Aspect • 16:9 Squeeze Resolution” is set to Video / Audio When “HDMI Video “480p”... -
Page 67: Display
Still Mode Display Use this Feature to Set the type of Still Image when Playback is Paused. Select “Auto” usually. Select a desired Item using [ ], then press [ OK ]. Select a Setting using [ ], then press [ OK ]. -
Page 68: Reset To Default
Caption Settings Digital Caption Service Closed Caption refers to Text of Dialogue or Descriptions This Function is available on Digital broadcasting. Displayed On-screen. Change the Settings for Digital Caption Service using this Menu. Use this Menu to change the Settings for Closed Caption. Selects one of these before changing Sets the selected Item in references below. -
Page 69: Background Color
<Font Opacity> TV Screen Protection Font Opacity of the displayed Caption can be Switched. This Setting will Reduce the Brightness of the On Screen Default Display by 25% when you do not operate any key on Remote Control for 5 Minutes. Solid Transparent Select a desired Item using [... -
Page 70: Hdmi
HDMI Playback / Recording Select a desired Item using [ ], then Select a desired Item using [ ], then press [ OK ]. press [ OK ]. Setup Setup HDMI Video Resolution • Auto Variable Skip • 30 Seconds Video / Audio Video / Audio HDMI Audio Out... -
Page 71: Other
Auto Chapter Remote Control The Unit Inserts Chapter Marks periodically during Recording. Sets the Code 1 or 2 for your Remote Control. Using the Auto Chapter menu, you can set this function Off or By setting the Remote Control Code to this Unit, you can Change the Time Period. -
Page 72: 12. Others
12. OTHERS Troubleshooting Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Symptom Remedy The Power Does Not turn On. - Page 73 No image from HDMI connection. • Check the HDMI connection. (Check the status of the HDMI related indications.) • Check whether the connected Monitor Device or other Device supports HDCP. (This unit will Not Output a Video signal unless the other Device supports HDCP.) •...
- Page 74 • Cannot guarantee about third party’s Remote Controls. Please Contact the Remote Manufacturer if you have any problem with it. • If above solutions do not solve the problem, please call our Customer Support at 1-866-310-0744 or visit www.philips.com/support for additional assistance. Cannot connect to the network.
-
Page 75: Error Message
Cannot rent or buy movies / TV • You need to activate the VUDU account. For detailed information, please visit episodes on VUDU. the service providers website at http://www.vudu.com/product_overview.html • Log into your account at http://my.vudu.com and check your payment information. -
Page 76: Glossary
Glossary Analog Audio HDMI (High-Definition Multimedia Interface) An electrical signal that directly represents sound. Compare A digital interface between audio and video source. It can this to digital audio which can be an electrical signal, but is an transmit component video, audio, and control signal with one indirect representation of sound. -
Page 77: Specifications
Specifications General HDR5750 HDR5710 1 TB 500 GB Power requirements 120V AC +/- 10%, 60Hz +/- 5% Power consumption 21W (standby: 0.35W) 18W (standby: 0.35W) Dimensions 11.1 x 2.0 x 8.0 inches (280 x 50.5 x 201.3mm) (width x height x depth) Weight 3.62 lbs. -
Page 78: One (1) Year Limited Warranty
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD- to it. This Limited Warranty does not apply to any non-Philips UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE hardware product or any software, even if packaged or sold LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR with the product. - Page 79 P&F Mexicana, S.A. de C.V. Av. La Palma No. 6, Col. San Fernando La Herradura. Huixquilucan, Edo. de México. C.P. 52787 Meet Philips at the Internet http://www.philips.com/support Philips and Philips Shield are used under EEC30UH / EEC31UH license of Koninklijke Philips N.V. ★★★★★...