Clock Setup; Clock Setting (Manual); Clock Setting (Auto); Time Zone - Philips HDR5750 User Manual

Clock Setup

Configure the Clock, Time Zone and Daylight Saving Time
Settings.
If the Clock is Not Set Correctly, Timer Recording does Not
Work Properly.
1.
Press [ (home) ], then select "Installation"
"Clock" using [
[ OK ].
• "Clock" is Not available (Not Displayed) during
Recording.

Clock Setting (Manual)

If this Unit is unable to obtain the Clock Information
automatically, Set up the Clock Manually.
2.
Select "Clock Setting" using [
press [ OK ].
3.
At <Date> section, enter "Year" / "Month" /
"Day" using [ /
Please set the Date and Time.
<Date> Year Month
- - - - - -
<Time> Clock
- - : - -
OK
If you want to set the clock automatically, please select "On" in Auto Clock.
4.
At <Time> section, enter Hour / Minute
and select AM / PM using [
then press [ OK ].
5.
Press [ OK ] on "OK" to complete.
• Press [ (home) ] Repeatedly to Exit.
Note(s)
• "Clock Setting" is Not available (Not Displayed) when
"Auto Clock" is "On".
EN - 28
/ / / ], then press
/ ], then
/ / ].
Day
- - (- - -)
- -
Cancel
/ / /

Clock Setting (Auto)

This Unit can set the Time and Date Automatically by referring
to a Channel that carries Clock Information.
2.
Select "Auto Clock" using [
press [ OK ].
3.
Select "On" using [
[ OK ].
• Channel selection window will appear.
4.
Select a channel using [
"Search" using [
[ OK ].
Channel setting of auto clock.
Cancel
• This Unit will Automatically Search for the Clock
Information and Display the result.
5.
At "DST", select "On" or "Off" for Daylight
Saving Time, then press [ OK ].
6.
Press [ OK ] on "OK" to complete.
• Press [ (home) ] Repeatedly to Exit.
Note(s)
• "Auto Clock" is Not available (Not Displayed) if there is
No Digital Channel entry in Antenna / Cable mode.
• If "Auto Clock" obtained the Incorrect Clock Information,
please Proceed with 'Clock Setting (Manual)'.

Time Zone

Set your Time Zone.
This unit recognizes 7 Time Zones as shown below.
],
• Atlantic • Eastern
• Pacific • Alaska
2.
Select "Time Zone" using [
press [ OK ].
3.
Select your Time Zone using [
press [ OK ].
• Press [ (home) ] Repeatedly to Exit.

Daylight Saving Time

Daylight Saving Time is referred to as "Summer Time".
Using this Function lets you Set the Clock Back and Ahead for
Daylight Saving Time.
2.
Select "Daylight Saving Time" using [
then press [ OK ].
3.
Select "On" or "Off" using [
press [ OK ].
• Press [ (home) ] Repeatedly to Exit.
/ ], then
/ ], then press
/ ], move to
(Cursor)], then press
11.1 Search
AAA
• Central • Mountain
• Hawaii
/ ], then
/ ], then
/ ], then
Continued on next page.
/ ],