Hdmi; Playback / Recording - Philips HDR5750 User Manual

HDMI

1.
Select a desired Item using [
press [ OK ].
Setup
HDMI Video Resolution
Video / Audio
HDMI Audio Out
Display
HDMI

Playback / Recording

Network
Software
Other
• Sub Menu will appear.
2.
Set the selected Item in references below.
Note(s)
• Settings for HDMI is only available when there is HDMI
Connection.
HDMI Video Resolution
Selects an HDMI output mode.
HDMI Connection makes this Unit automatically output the
most suitable resolution for your TV.
1.
Select a desired Item using [
press [ OK ].
Auto:
Optimum setting will be selected.
480p:
Sets HDMI resolution to 480 Progressive
720p:
Sets HDMI resolution to 720 Progressive
1080i:
Sets HDMI resolution to 1080 Interlaced
1080p:
Sets HDMI resolution to 1080 Progressive
• The HDMI mode that is Not Supported by the
Display Device will be Skipped.
Note(s)
• When the HDMI Video Resolution is set to "Auto" or
"1080p", Video signals are not output from the Video Out
jack depending on your TV.
HDMI Audio Out
If you do not wish to Output the Audio through HDMI, you can
set the HDMI Audio Output Off.
1.
Select a desired Item using [
press [ OK ].
• Set to "Off " when the HDMI Sound is Not Output.
On: Outputs the Audio from HDMI.
Off: Mutes the Audio from HDMI.
• Your Setting will be Activated.
EN - 70
Playback / Recording
1.
/ ], then
Setup
• Auto
Video / Audio
• On
Display
HDMI
Playback / Recording
Network
Software
Other
2.
Assign [ SKIP ] or [ REPLAY ] to Skip or Rewind by a
certain amount of Time when they are pressed during
Playback.
1.
■
Variable Skip
/ ], then
Sets the amount of Skip time for [ SKIP ].
5 Seconds:
10 Seconds: Sets the amount of Skip time to 10 Seconds.
30 Seconds: Sets the amount of Skip time to 30 Seconds.
1 Minute:
5 Minutes:
■
Variable Replay
Sets the amount of Rewind time for [ REPLAY ].
5 Seconds:
10 Seconds: Sets the amount of Rewind time to
30 Seconds: Sets the amount of Rewind time to
1 Minute:
5 Minutes:
/ ], then
Select a desired Item using [
press [ OK ].
Variable Skip
Variable Replay
Auto Chapter
• Sub Menu will appear.
Set the selected Item in references below.
Variable Skip / Replay
Select a desired Item using [
press [ OK ].
Sets the amount of Skip time to 5 Seconds.
Sets the amount of Skip time to 1 Minute.
Sets the amount of Skip time to 5 Minutes.
Sets the amount of Rewind time to
5 Seconds.
10 Seconds.
30 Seconds.
Sets the amount of Rewind time to 1 Minute.
Sets the amount of Rewind time to
5 Minutes.
/ ], then
• 30 Seconds
• 10 Seconds
• 10 Minutes
/ ], then
Continued on next page.