Pioneer LX03BD Operating Instructions Manual page 111

Advanced settings
Setting
HDMI Color Space
Normally it is recommended to set this to Auto. When set to Auto, the optimum video signals for your TV are
output.
HDMI Audio Out
PQLS
HDMI Control
Language
OSD Language
Options Explanation
Auto
The video signal that is output (YCbCr or RGB) is switched
automatically.
YCbCr 4:4:4 Select this to output the video signals as YCbCr 4:4:4 signals.
YCbCr 4:2:2 Select this to output the video signals as YCbCr 4:2:2 signals.
RGB (16 to 235) Select this to output the video signals as RGB signals.
Choose this if the colors seem too dense and all the dark
colors are displayed in a uniform black when RGB (0 to 255)
is selected.
RGB (0 to 255) Select this to output the video signals as RGB signals.
Choose this if the colors seem too faint and the black seems
too bright when RGB (16 to 235) is selected.
Auto The signals are output with as many audio channels as
possible. In cases when the number of channels does not
decrease when the signals are output as such without
converting them to linear PCM, they are output as such
(page 121).
PCM Select this when you want the secondary audio and
interactive audio signals to be mixed for output or when you
want to output prioritizing sampling frequency over the
number of channels (page 121).
Auto
Enables PQLS function (page 78).
Off Disables PQLS function (page 78).
On Select this to control the player with the remote control of the
AV device connected using an HDMI cable. Also refer to
About HDMI Control function on page 78.
Off Select this when you do not want to control the player with the
remote control of the AV device connected using an HDMI
cable.
English Select this to set the language of the on-screen displays to
English.
available languages Choose a language for the on-screen displays from the listed
languages.
06
111
En