Pioneer LX03BD Operating Instructions Manual page 63

Additional information
Message
Error MIC!
Error Speaker!
Error SW!
(SX-LX08 model only)
Exit
HDMI Audio <TV>
HDMI C.ERR 1**
HDCP ERROR
Key Lock
Line Out Mode
Muting
No MIC
Noisy!
Not support
OC Error1
OC Error2
Over Temp
Phones In
*** BackUpERR
Description
An error occurred during MCACC setup because the microphone is not connected
or is not connected properly.
An error occurred during MCACC setup because the speakers are not connected or
are not connected properly.
When performing MCACC setup, no sound could be detected from subwoofer.
Confirm that the subwoofer's power switch is set to ON, and raise subwoofer sound
volume to comfortable level, then press ENTER once again.
Appears when a menu is automatically exited after a set period of inactivity.
Displays when you change the listening mode, the volume level, or some sound
settings when the HDMI Audio is set to TV.
Check if the HDMI cable is properly connected. If the cable is properly connected,
this unit may be damaged. In such an event, please contact a Pioneer-authorized
service center or your nearest dealer.
Check whether or not the connected component is compatible with HDCP. Some
components that are compatible with HDCP still cause this message to be
displayed, but so long as there is no problem with displaying video, this is not a
malfunction.
The key lock is enabled. See Key lock setting on page 57.
Operation is disabled since Line Output is set to Lt/Rt.
When audio is muted, display appears if Auto MCACC setup is performed.
Display appears when Auto MCACC setup is performed without a microphone
connected.
Background noise is too high to complete MCACC setup successfully.
Try adjusting the resolution, DeepColor or other setting for your component.
Check whether the speaker cables are short-circuited. If the error message
continues to be displayed, contact your Pioneer authorized service center or your
dealer for servicing.
Try lowering the volume. If this problem is not fixed by removing and inserting the
power cable, this unit may be damaged. In such an event, please contact a Pioneer-
authorized service center or your nearest dealer.
An operation is prohibited because the headphones are connected.
Contact your Pioneer authorized service center or your dealer for servicing.
11
63
En