Pioneer LX03BD Operating Instructions Manual page 126

07 Additional information
Problem
Multi-channel sound
is not output.
Digital audio signals
are not output from
the DIGITAL OUT
(OPTICAL) terminals
(analog audio signals
are output).
Noise can be heard
when outputting DTS
Digital Surround
signals.
192 kHz or 96 kHz
digital audio signals
cannot be output
from the DIGITAL
OUT (OPTICAL)
terminals.
Secondary audio or
interactive audio is
not output.
Sound is fast or slow. When an HDMI cable is
126
En
Check
Is the AV receiver or amplifier,
etc. connected to the HDMI
OUT terminal, the AUDIO OUT
(7.1 ch) terminals or DIGITAL
OUT (OPTICAL) terminal?
Is Output Terminal Priority
properly set?
Is the audio output of the
connected AV receiver or
amplifier, etc., properly set?
Is multi-channel sound
selected?
Is Audio Out set to audio
formats supported by the
connected AV receiver or
amplifier?
Are Audio Output Mode and
Speaker Setup properly set?
Is Audio Out set to audio
formats supported by the
connected AV receiver or
amplifier?
Is the connected AV receiver or
amplifier compatible with DTS
Digital Surround?
Is HDMI Audio Out properly
set?
Are Dolby Digital Out and DTS
Out properly set?
connected, are audio signals
being output from devices
connected with cables other
than HDMI cables?
Remedy
Read the operating instructions of the connected AV
receiver or amplifier and check the audio output settings of
AV receiver or amplifier.
Linear PCM (2-channel) audio signals are output from
output terminals other than the one set at Audio under
Output Terminal Priority. Set Output Terminal Priority
properly (page 119).
Read the operating instructions of the connected AV
receiver or amplifier and check the audio output settings of
AV receiver or amplifier.
Use the menu screen or AUDIO to switch the disc's sound
to multi-channel.
• Read the operating instructions of the connected AV
receiver or amplifier and check the supported audio formats.
• Set Audio Out properly (page 109).
• When the AV receiver or amplifier, etc., is connected to the
AUDIO OUT (7.1 ch) terminals, set Audio Output Mode to
Multi-channel (page 110).
• Set Speaker Setup properly (page 110).
• Read the operating instructions of the connected AV
receiver or amplifier and check the supported audio
formats.
• Set Audio Out properly (page 109).
If an AV receiver or amplifier that is not compatible with DTS
Digital Surround is connected to the DIGITAL OUT
terminal, set DTS Out to DTS  PCM. Noise will be heard
if DTS Out is set to DTS (page 109).
It is not possible to output 192 kHz or 96 kHz digital audio
signals from this player's DIGITAL OUT (OPTICAL)
terminals. The signals are automatically converted to under
96 kHz for output.
Set HDMI Audio Out to PCM (page 111).
Set Dolby Digital Out to Dolby Digital 1, DTS Out to DTS
1 (page 109).
When this player is connected by HDMI cable to a Pioneer
AV receiver or amplifier compatible with the PQLS function
via HDMI connection, the PQLS function is activated when
playing a music CD (CD-DA). Because of this, the sound
output from components other than the ones connected by
HDMI cable may be fast or slow. If this happens, set PQLS to
Off (page 111).