Adjusting The Audio Drc - Pioneer LX03BD Operating Instructions Manual

Adjusting audio and video

Adjusting the Audio DRC

Audio DRC (Dynamic Range Control) has the
effect of playing loud sounds softly and soft
sounds loudly. Adjust the setting for example
when watching movies late at night and the
dialogs are difficult to hear.
SETUP
1 During playback, display the TOOLS
TOOLS
menu.
ENTER
2 Select and set Audio DRC.
Use / to select, then press ENTER.
BD PLAYER
Audio
TOOLS
Subtitle
Audio DRC
Video Adjust
Output Video Resolution
3 Adjust the setting.
Use / to switch between Off, Low,
Medium, High and Auto.
Audio DRC
Adjust the audio dynamic range. This setting is
ineffective depending on the playing audio.
Closing the Audio DRC screen
• Press ENTER or HOME MENU.
Note
• This only affects the Dolby TrueHD, Dolby
Digital Plus and Dolby Digital audio signals
of BDs, DVDs and movie files.
• When Auto is selected, the setting has the
same effect as High or Off for Dolby
TrueHD signals, depending on the content.
For Dolby Digital Plus and Dolby Digital,
the setting has the same effect as Off.
Off
• Audio DRC affects the audio signals output
from the following audio output terminals:
– Analog audio signals output from the
AUDIO OUT (2 ch) or AUDIO OUT (7.1
ch) terminals.
– Linear PCM audio signals output from
the DIGITAL OUT terminals or HDMI
OUT terminal.
• The effect may be weak for some discs.
05
107
En