Connecting Using Hdmi - Pioneer LX03BD Operating Instructions Manual

09 Other connections

Connecting using HDMI

If you have a HDMI or DVI (with HDCP)
equipped monitor or display, you can connect
it to this system using the supplied (or
commercially available) for high quality digital
1
video.
See About HDMI on page 52 for more about the
HDMI connection.
ANALOG
1
L
R
AUDIO IN
COAX 3
OUT
DIGITAL IN HDMI
HDMI/DVI-equipped component
Note
1 • An HDMI connection can only be made with DVI-equipped components compatible with both DVI and High Bandwidth
Digital Content Protection (HDCP). If you choose to connect to a DVI connector, you will need a separate adaptor (DVIHDMI)
to do so. A DVI connection, however, does not support audio signals. Consult your local audio dealer for more information.
• This system has been designed to be compliant with HDMI (High-Definition Multimedia Interface).
• When HDMI Audio is set to TV, sound is output from this unit to the TV connected to the HDMI connectors in for audio format
supported by that TV.
• Depending on the component you have connected, using a DVI connection may result in unreliable signal transfers.
50
En
TV
To HDMI input
OPTICAL
1
AM
LOOP
FM
2
UNBAL
75
DIGITAL IN ANTENNA
IN 2 IN 1
From HDMI output
1 Use the supplied HDMI cable to connect
the HDMI IN 1/2 interconnect on this system
to an HDMI output on your HDMI component.
• With the arrow on the cable plug facing up,
connect the plug to the player's connector.
Once this system is properly connected to your
HDMI component, the HDMI indicator (red)
lights up on the front panel when you watch
HDMI contents.
2 Use the supplied HDMI cable to connect
the HDMI OUT interconnect on this system to
an HDMI interconnect on an HDMI-
compatible display.
1/2
3 Press repeatedly to select the HDMI
HDMI
input you've connected to (for example,
HDMI 2).
You can also use the front panel INPUT to carry
out this operation.
• Set the HDMI Audio setting to TV in
Switching the HDMI audio setting below if
you want to hear HDMI audio output from
your TV or Flat Screen TV (no sound will be
heard from this unit).
• If the video signal does not appear on your
TV or Flat Screen TV, try adjusting the
resolution settings on your component or
display.