Rear Panel - Pioneer LX03BD Operating Instructions Manual

Controls and displays
4 Character display
Displays the title/chapter/track number,
elapsed time, etc.
5 24HZ/50HZ/60HZ
The frequency of the video frame or field being
output lights.

Rear Panel

1
R
AUDIO OUT ( 2 ch )
1 AUDIO OUT (2 ch) terminals
Connect with the audio input terminals on a TV
or tape recorder, etc.
2 AUDIO OUT (7.1 ch) terminals
Connect with the 7.1 channel audio input
terminals on an AV receiver or amplifier, etc.
3 VIDEO OUT terminals
VIDEO – Connect with the video input
terminal on a TV.
S-VIDEO – Connect with the S-Video input
terminal on a TV.
COMPONENT VIDEO – Connect with the
component video input terminals on a TV.
4 AC IN
Connect the power cord here.
5 HDMI OUT terminal
Connect to the HDMI IN 1 jack of the receiver
with the supplied HDMI cable.
6 DIGITAL OUT (OPTICAL)
Connect with the digital audio input terminal
on the other audio component.
2
FRONT SURROUND SURROUND BACK CENTER
L
L
R
SUB WOOFER
AUDIO OUT ( 7.1 ch )
OPTICAL
CONTROL DIGITAL
IN OUT
7 6
6 CONTROL
Lights when the HDMI Control function is
activated (page 78).
3
VIDEO OUT
Y
VIDEO
P B
HDMI OUT
P
R
COMPONENT
S-VIDEO
VIDEO
5
7 CONTROL IN terminal
Use to control this player from the remote
sensor of another Pioneer component with a
CONTROL OUT terminal and bearing the 
mark. Connect the CONTROL OUT of the other
component to the CONTROL IN of this player
using a mini-plug cord.
Caution
• Be sure to connect cables for outputting the
audio and video signals (pages 76 and 80).
• When connected via System Control, point
the remote control toward the connected
component. The remote will not work
correctly when pointed at this player.
• You cannot use System Control with
components that do not have a System
Control terminal or with components
manufactured by companies other than
Pioneer.
01
4
AC IN
15
En