Line Out Options; Connecting Using Hdmi - Pioneer DCS-363 Operating Instructions Manual

Other connections
SCART pin assignment
The diagram below shows the SCART 21-pin
connector assignment. This connector
provides the video and audio signals for
connection to a compatible color TV/monitor.
Pin No. Assignment
1 Audio R OUT
2 Audio R IN
3 Audio L OUT
4 GND (audio)
5 GND (video)
6 Audio L IN
7 B OUT
8 Status
9 GND (video)
10 No connection
11 G OUT
Note
1 • When the line out mode is on, most sound features cannot be used. The display will briefly blink LINE ON if you try and use a
prohibited function while the line out mode is on.
• The line out mode switches off if you change the input function (DVD/CD, TUNER, etc.) or switch the power off.
• This option is not effective when listening a source from LINE2.
2 • An HDMI connection can only be made with DVI-equipped components compatible with both DVI and High Bandwidth
Digital Content Protection (HDCP). If you choose to connect to a DVI connector, you will need a separate adaptor (DVIHDMI)
to do so. A DVI connection, however, does not support audio signals. Consult your local audio dealer for more information.
• This unit has been designed to be compliant with HDMI (High Definition Multimedia Interface) Version 1.1. Depending on
the component you have connected, using a DVI connection may result in unreliable signal transfers.
• When you change the component connected to the HDMI output, you will also need to change the HDMI settings to match
the new component (see Video Output settings on page 27 to do this).
Pin No. Assignment
12 No connection
13 GND (video)
14 GND (video)
15 R or C OUT
16 BLANK OUT
17 GND (video)
18 GND (video)
19 Video or Y OUT
20 No connection
21 GND (video)

Line Out options

The Line Out function allows you to determine
how sound from LINE OUT and AV
CONNECTOR terminals is output.
• Press LINE OUT to cycle through LINE ON
and LINE OFF options, then press ENTER to
confirm you selection.
• LINE ON – Multichannel sources are
downmixed to 2.1 ch (stereo). For both
LINE OUT and AV CONNECTOR terminals
a 2 ch downmix signal is produced.
• LINE OFF – For regular multichannel
playback through your speaker system.
Note that no signal is produced from the
LINE OUT terminal: AV CONNECTOR
sound is output in Left/Right channels
only.

Connecting using HDMI

If you have a HDMI or DVI (with HDCP)
equipped monitor or display, you can connect
it to this player using a commercially available
HDMI cable for high quality digital video.
See About HDMI below for more about the
HDMI connection.
09
1
2
33
En