Audio Drc - Pioneer RCS-77H Operating Insructions

The Video/Audio Adjust menu
• Black Level – Adjusts the intensity of black.
• Black Setup – Corrects the standard reference black
level (NTSC video playback only).
• Gamma Correction – Adjusts the brightness of
darker images.
• Hue – Adjusts overall balance between red and
green.
• Chroma Level – Adjusts how rich the colours
appear.
4 Use the buttons to adjust the currently
selected picture quality setting.
5 When you have all the settings as you want
them, press HOME MENU to exit.
Tip
• To see more of the picture as you adjust different
settings, press ENTER after selecting the setting you
want to adjust.

Audio DRC

• Default setting: Off
When watching Dolby Digital material at low volume via
the analog audio outputs (or via the digital output when
the Dolby Digital Out setting is set to Dolby Digital
PCM), low level sounds—including some of the dialog—
can be difficult to hear properly. Switching on Audio DRC
(Dynamic Range Control) can help by bringing up the low
level sounds, while controlling high level peaks.
1 During playback or when paused, press HOME
MENU and select 'Video/Audio Adjust'.
2 Select 'Audio Adjust'.
3 Use the buttons to adjust DRC from 'Off' to
'Max'.
Audio DRC
Audio DRC
Exactly how much difference you can hear between the
settings will depend on the material.
Tip
• Audio DRC is not effective when listening to a disc via
the digital output when Dolby Digital Out is set to
Dolby Digital. In this case adjust the dynamic range
from the receiver subwoofer—see Dynamic Range
Control on page 30.
Off Max
13
129
En