Drilled Paper; 1-Sided Print Jobs - Xerox DocuColor 5000AP User Manual

Drilled paper

Do c u Co lo r 50 0 0A P U s e r G u i de
Three-hole drilled paper can be run from all the trays either LEF or
SEF with the holes facing any direction.
NOTE: If you are stapling 3-hole drilled paper with the optional
Common Stacker Stapler (CSS), refer to Chapter 4 Accessories
for paper loading instructions based on the position of the staple.
Drilled paper should be run in the Simplex (1-sided) and Duplex
(2-sided) orientations shown below to avoid paper jams caused by
the holes not aligning correctly with the paper sensor in the press.

1-Sided Print Jobs

Load the drilled paper into any tray in the Long Edge Feed (LEF)
direction. Refer to the following illustration:
2-Sided Print Jobs
Load drilled paper into any tray in either the Long Edge Feed
(LEF) or Short Edge Feed (SEF) direction. Refer to the following
illustration:
LEF direction
Rear of paper tray
Paper
tray
guides
Front of paper tray
NOTE: If you are stapling 3-hole drilled paper with the optional
Common Stacker Stapler (CSS), refer to Chapter 4 Accessories
for paper loading instructions based on the position of the staple.
Rear of paper tray
Paper
Right
tray
side
guides
Front of paper tray
Rear of paper tray
Right
side
3 . P ap e r i nf o r ma ti o n
SEF direction
Paper
tray
guides
Front of
paper tray
3-7