Setting Applicable Functions To New Users; Configuring The Energy Saver Mode - Savin MLP31n Operating Instructions Manual

Restricting Functions
Follow the procedure below to restrict use of individual functions.
1. Start SmartDeviceMonitor for Admin.
2. Click the [User Counter Information] tab of User Management Tool.
3. On the [Edit] menu of User Management Tool, click [Restrict Access To Device].
4. Select the check box of the functions you want to restrict.
5. Click [OK].
A confirmation message appears.
6. Click [Yes].
The settings are applied.

Setting Applicable Functions to New Users

Follow the procedure below to add new users and set functions applicable to them.
1. Start SmartDeviceMonitor for Admin.
2. Click the [Access Control List] tab of User Management Tool.
3. On the [Edit] menu, click [Add New User].
4. Enter the user code and user name.
5. Select the check box of the functions applicable to the new user.
If the check boxes are unavailable, there is no restriction to use that function. For details, see
SmartDeviceMonitor for Admin Help.
6. Click [OK].
The new user is added.
7. On the [Edit] menu, click [Apply Settings].
The settings are applied.
8. Click [Exit] on the [File] menu to quit User Management Tool.
• For details about setting restrictions, see SmartDeviceMonitor for Admin Help.

Configuring the Energy Saver Mode

Follow the procedure below to configure Energy Saver mode.
1. Start SmartDeviceMonitor for Admin.
Using SmartDeviceMonitor for Admin
6
183