Changing The Paper Size; Changing The Paper Roll Size - Savin 4800WD Operating Manual

Changing the Paper Size

Preparation
When changing the paper size, make sure the paper size in the User Tools
menu are correctly set. If you do not, misfeeds might occur.
If you load a paper size that is not selected automatically, you need to specify
the paper size with the User Tools. See p.62 "Tray Paper Size: Tray 1, Tray 2",
and p.63 "Tray Paper Size: Tray 3, Tray 4 (when Cut Paper Trays are in-
stalled)".
The following paper sizes are not selected automatically:
1
12"×14 / "L, 11"×15"L, 11"×14"KL, 10"×14"K, 8
2
1 1
8 / "×13"L, 8 /
2 2

Changing the Paper Roll Size

Removing the roll holder
Important
❒ Always follow the instructions below when adjusting the roll holder. Do not
force the roll holder by pulling or sliding it strongly. This could damage it.
"×12"KL
AHD036S
Changing the Paper Size
1
/ "×14"KL,
2
6
115