Table 11 Configuration > Interface > Ethernet (continued)
LABEL
Mask
Reset
6.2.1 Ethernet Edit
The Ethernet Edit screen lets you configure IP address assignment. To access this screen, select an
interface and click its Edit icon in the Ethernet screen. (See
The screen varies depending on the connection type (DHCP, Ethernet Fixed IP, PPPoE) you select.
DHCP
Select DHCP to set this interface to act as a DHCP client and automatically get the WAN IP address,
subnet mask, gateway address and DNS server information from a DHCP server.
Figure 21 Configuration > Interface > Ethernet > Edit (DHCP)
Ethernet Fixed IP
Select Ethernet Fixed IP if your ISP assigned you a fixed IP address and DNS server information. Specify
the IP address, subnet mask, gateway and DNS server address manually.
Chapter 6 Configuration
DESCRIPTION
This field displays the interface's subnet mask in dot decimal notation.
Click Reset to return the screen to its last-saved settings.
NSG Series User's Guide
21
Section 6.2 on page
20.)