Mounting; Orientation; Rigging - Chauvet SlimPAR User Manual

Before mounting this product, read and follow the safety recommendations indicated in

Mounting

the Safety Notes section (page 2 of this manual).
The SlimPAR™ 64 may be mounted in any position, provided there is adequate room for

Orientation

ventilation around it.
Before deciding on a location for this product, always make sure that it will be easy to

Rigging

access the unit for maintenance and programming purposes.
Make sure that the structure onto which you are mounting this product can support its
weight. Please see the Technical Specifications section of this manual for weight
information.
When mounting this product overhead, always use a safety cable. Mount the fixture
securely to a rigging point, whether an elevated platform or a truss.
When rigging this product onto a truss, you should use a mounting clamp of appropriate
weight capacity. The bracket has a 13 mm hole, which is appropriate for this purpose.
When power linking multiple fixtures, you must always consider the length of the power
linking cable and mount the fixtures close enough for the cable to reach them.
The bracket knobs allow for directional adjustment when aiming the fixture to the desired
angle. Only loosen or tighten the bracket knobs using your bare hands. Using tools
could damage the knobs.
The double bracket yoke/mounting brackets/feet also serve as floor support(s) or
surface mounting. When mounting this fixture on the floor, make sure that the fixture and
its cables are away from people and vehicles.
Mounting Clamp
Safety Cable
Mounting Diagram
Double-Bracketed
Yoke
SlimPAR™ 64 User Manual Rev. 5 Page 7 of 12