Chauvet SlimPAR User Manual page 4

Page 4 of 12
·
Always make sure that the voltage of the outlet to which you are connecting this
product is within the range stated on the decal or rear panel of the fixture.
·
This product is for indoor use only! To prevent risk of fire or shock, do not expose
this fixture to rain or moisture.
·
Make sure there are no flammable materials close to the unit while operating.
·
Always install this product in a location with adequate ventilation, at least 20 in (50
cm) from adjacent surfaces.
·
Be sure that no ventilation slots on the unit's housing are blocked.
·
Always disconnect this product from the power source before cleaning it or replacing
the fuse.
·
Make sure to replace the fuse with another of the same type and rating.
·
If mounting this product overhead, always secure it to a fastening device using a
safety cable.
·
The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate this
product at higher temperatures.
·
In the event of a serious operating problem, stop using the unit immediately.
·
Never try to repair this product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center.
·
Never connect this product to a dimmer pack.
·
Make sure the power cord is not crimped or damaged.
·
Never disconnect the power cord by pulling or tugging on the cord.
·
Never carry this product from the power cord or any moving part. Always use the
mounting bracket.
·
Always avoid direct eye exposure to the light source when this fixture is on.
SlimPAR™ 64 User Manual Rev. 5