Dmx Channel Assignments And Values; 7-Ch Mode; Technical Information; General Maintenance - Chauvet SlimPAR User Manual

DMX Channel Assignments and Values

Channel

7-CH Mode

Channel
3-CH Mode
5. T
ECHNICAL
General
Maintenance
Page 10 of 12
·
Configure all the slave units before connecting the master unit to the DMX
daisy chain.
·
Never connect a DMX controller to a DMX string configured for Master/Slave
operation because it may interfere with the signals from the master unit.
·
Do not connect more than 31 slave units to the master unit.
Function
1 Red
2 Green
3 Blue
Color Macros
4
(Overrides CH 1~3)
Speed
(When CH.6 is between 032~223)
5
Strobe
6 Mode
7 Dimmer
Function
1 Red
2 Green
3 Blue
I
NFORMATION
Dust build-up reduces light output performance and can cause overheating. This can
lead to reduction of the light source's life and mechanical wear. To maintain optimum
performance and minimize wear, you should clean your lighting fixtures at least twice a
month. However, be aware that use and environmental conditions could be contributing
factors to increase the cleaning frequency.
To clean this fixture, follow the instructions below:
·
Unplug the fixture from power.
·
Wait until the fixture is at room temperature.
·
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface and vents.
·
Clean the LED transparent cover with a mild soap solution, ammonia-free glass
cleaner, or isopropyl alcohol.
·
Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
·
Softly wipe any dirt or grime to the outside edges of the LED transparent cover.
·
Gently polish the transparent LED cover until it is free of haze and lint.
Always dry the transparent LED cover carefully after cleaning.
Value Setting
000 ó 255 0~100%
000 ó 255 0~100%
000 ó 255 0~100%
000 ó 015
No function
016 ó 255
Color Macros
000 ó 255 0~100%
000 ó 015
No function
016 ó 255
Slow~fast
000 ó 031
RGB mode
032 ó 063
Pulse effect 0%~100%
064 ó 095
Pulse effect 100%~0%
096 ó 127
Pulse effect 100%~0%~100%
128 ó 159
Auto fade transition
160 ó 191
Auto snap transition (3 colors)
192 ó 223
Auto snap transition (7 colors)
224 ó 255
Sound triggering mode
000 ó 255 0~100%
Value Setting
000 ó 255 0~100%
000 ó 255 0~100%
000 ó 255 0~100%
SlimPAR™ 64 User Manual Rev. 5