Lock Setup - Integra DTR-8.9 Instruction Manual

Advanced Setup—Continued
Power Control
To link the power functions of
components connected via HDMI, select "Enable".
Disable: Power Control disabled.
Enable: Power Control enabled.
Notes:
• The setting can be set only when the
"Power Control"
above "Control" setting is set to "Enable".
• HDMI power control only works with
patible components that support it and may not work
properly with some components due to their settings
or compatibility.
• When set to "Enable", power consumption will
increase.
• Refer to the connected component's instruction man-
ual for details.
TV Control
Set to "Enable" when you want to control the AV
receiver from an -compatible TV that is con-
nected to HDMI.
Disable: TV Control disabled.
Enable: TV Control enabled.
Notes:
• Set to when the TV is not compatible or
"Disable"
when it is unclear whether the TV is compatible or
not.
• The setting can be set only when the
"TV Control"
above and
"Control" "Power Control"
set to "Enable".
• Refer to the connected component's instruction man-
ual for details.
Note:
After changing the settings of the
, or
Control" "TV Control"
connected pieces of equipment and then turn on
again. Refer to the User's Manuals for all connected
pieces of equipment.
When linking to a TV that conforms to the CEC
standard, the "Monitor Out" setting must be set to
"HDMI Main".
Network
DTR-8.9:
These settings are for use with home automation equip-
ment and external controllers.
DTR-9.9:
See "Network Settings" on page 138.
-compatible
-com-
settings are both
"Control" , "Power
, turn off the power to all

Lock Setup

Lock
With this setting, you can protect your settings by lock-
ing the setup menus.
Locked: Setup menus locked.
Unlocked: Setup menus unlocked (default).
When Locked is selected, only this "Lock Setup" item
can be accessed.
129