Integra DTR-8.9 Instruction Manual page 110

Table of Contents

Advertisement

Advanced Setup—Continued
6
Use the Up and Down [ ]/[ ] but-
tons to select a speaker, and use
the Left and Right [ ]/[ ] but-
tons to specify the distance.
Enter
Specify the distance from the speaker
to your listening position.
Notes:
• The "Center" distance cannot be set
if the "Center" is set to "None"
Enter
(page 106).
• The "SurrRight" and "SurrLeft" dis-
tances cannot be set if the "Sur-
round" is set to "None" (page 106).
• The "SurrBack R" and "SurrBack L"
distances cannot be set if "Speaker
Type" is set to "Bi-Amp" or "BTL"
(page 57), "SurrBack" is set to
"None" (page 106), or "Powered
Zone2" is being used (page 142).
• The "Subwoofer" distance cannot be
set if "Subwoofer" is set to "No"
(page 107).
7
Repeat step 6 for each speaker.
8
Press the [Setup] button.
Setup closes.
Note:
This procedure can also be performed on the AV receiver
by using its [Setup] button, arrow buttons, and [Enter]
button.
110
Speaker Level Calibration
These settings are set automatically by the Automatic
Speaker Setup function (see page 60).
With the "Level Calibration" settings, you can adjust the
level of each speaker while listening to the test tone so
that the volume of each speaker is the same at the listen-
ing position.
Notes:
• The speakers cannot be calibrated while the output of
the AV receiver is muted.
• The test tone is output at the standard level for THX,
which is 0 dB (absolute volume setting 82). If you nor-
mally listen at volume settings below this, be careful
because the test tone will be much louder.
7
8
Phono
Net/USB
+10
0
--/--- 10
11
Input Selector
Macro
1
2
Remote Mode
DVD
VCR
TV
Cable
SAT
Dimmer
+
CH
Enter
Disc
Album
-
1, 6
Prev
CH
Display
Rec
Playlist
Listening Mode
Stereo
Surround
1
Press the [Receiver] Remote but-
ton, followed by the [Setup] but-
Receiver
ton.
The main menu appears onscreen.
If the main menu doesn't appear, make
sure the appropriate external input is
selected on your TV.
9
TV VOL
D.TUN
Clear
12
3
Zone 3
CD
Zone 2
CDR/MD/Dock
1
Net/USB
Receiver
Tape/AMP
Sleep
2–5
VOL
Muting
Random

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dtr-9.9

Table of Contents