Copying A Photo; Using The Default Settings To Copy A Photo - Kodak 8406324 Extended User Manual

Copying a photo

Using the default settings to copy a photo

You can copy a photo using the default settings, or you can adjust the quantity, size,
quality, and brightness of your copies.
The default settings are either the factory default settings (see
defaults, page 100), or defaults that you have set on the printer (see the bottom
entry in the table under
1. Load photo paper into the printer (see
2. Lift the scanner lid, and place the photo face down in the right-front corner of
the scanner glass.
3. Close the lid.
4. Press .
5. Touch Copy Photo.
6. Press .
www.kodak.com/go/aiosupport
Adjusting the settings and copying a photo, page
Loading photo paper, page
KODAK ESP 3.2 / 3.2s All-in-One Printers
Resetting factory
72).
46).
71