Enable/Disable The Beep; Setting The Language; Cup Light; Default Values (Reset) - DeLonghi ECAM23.460 Instructions For Use Manual

Enable/disable the beep

This enables or disables the beep emitted by the machine
each time the buttons are pressed or an accessory is inserted/
removed. The beep is active by default.
To disable or re-enable the beep, proceed as follows:
1. Press the P button to enter the menu;
2. Turn the selection dial (fig. 8) until "Beep" is displayed;
3. Press the button. "Disable?" or "Enable?" is
displayed;
4. Press the button to enable or disable the beep;
5. Activation of the beep is indicated by an asterisk below
the "Beep" item in the menu. Press the
exit the menu.

Setting the language

To modify the language of the display, proceed as follows:
1. Press the P button to enter the menu;
2. Turn the selection dial (fig. 8) until "Set language" is
displayed;
3. Press the button;
4. Turn the selection dial until the required language is
displayed;
5. Press the button to confirm;
6. A message confirming the language installed is
displayed;
7. Then press the

Cup light

This function enables or disables the cup lights. The lights are
enabled by default.
The lights come on each time coffee and cappuccino is made
and during each rinsing cycle.
To disable or re-enable this function, proceed as follows:
1. Press the P button to enter the menu;
2. Turn the selection dial (fig. 8) until "Cup lighting" is
displayed;
3. Press the button. "Disable?" or "Enable?" is
displayed;
4. Press the button to enable or disable the cup
lighting;
5. When the function is active, an asterisk appears under
"Cup lighting" in the menu. Press the
the menu.

Default values (reset)

This resets all menu settings and programmed quantities back
to the default values (with the exception of the language
which remains as set).
To reset the default values, proceed as follows:
button to
button to exit the menu.
button to exit
1. Press the P button to enter the menu;
2. Turn the selection dial (fig. 8) until "Default values" is
displayed;
3. Press the button;
4. "Confirm?" is displayed;
5. Press the button to confirm and exit.

Statistics function

This displays statistics relating to the machine.
To display, proceed as follows:
1. Press the P button to enter the menu;
2. Turn the selection dial (fig. 8) until "Statistics" is
displayed;
3. Press the button;
4. Turn the selection dial (fig. 8) to verify:
- how many coffees have been made;
- the total number of cappuccinos and milk based coffees
made;
- the total number of litres of water delivered;
- how many times the machine has been descaled;
- how many times the water softener filter has been
replaced.
5. Press the

MAKING COFFEE

Selecting the coffee taste

The appliance is set by default to make coffee with a standard
taste. You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the
until the required taste is displayed.

Selecting the quantity of coffee in the cup

The appliance is set by default to make a standard quantity
of coffee. To select the quantity of coffee, turn the selection
dial (fig. 8) until the message corresponding to the required
quantity of coffee is displayed:
Coffee selected
MY COFFEE
SHORT
STANDARD
11
button twice to exit the menu.
dial (fig. 7) repeatedly
Quantity in cup (ml)
Programmable:
from ≃20 to ≃180
≃40
≃60