Cleaning The Milk Frother Using The Clean Function; Programming The Quantity Of Coffee And Milk In The Cup For Cappuccino Or Milk; Hot Water; Changing The Quantity Of Water Delivered Automatically - DeLonghi ECAM23.460 Instructions For Use Manual

Cleaning the milk frother using the CLEAN function

Important! Danger of burns
When cleaning the internal tubes of the milk container, a little
hot water and steam leak out of the frothed milk spout.
Avoid contact with splashes of water.
"SET DIAL TO CLEAN" flashes on the display each time you
use a milk function. To eliminate all milk residues, proceed as
follows:
1. Leave the milk container in the machine (you do not need
to empty it);
2. Place a cup or other recipient under the frothed milk
spout.
3. Turn the froth adjustment dial to "CLEAN" (fig. 22). A
progress bar appears and gradually fills as the operation
proceeds together with "Cleaning underway, Please wait".
Cleaning stops automatically.
4. Turn the dial back to one of the froth selections.
5. Remove the milk container and always clean the steam
connection nozzle with a sponge (fig. 26).
Please note!
• To prepare a number of cappuccinos or milk based coffees,
clean the milk container after you have prepared the last
drink only.
• The milk container can be kept in the refrigerator.
• In some cases, to clean you must wait for the appliance to
heat up.
Programming the quantity of coffee and milk in the
cup for cappuccino or milk
The appliance is set by default to automatically deliver standard
quantities. To change these quantities, proceed as follows:
1. Place a cup under the coffee spouts and milk spout.
2. Press and hold the CAPPUCCINO button until the message
"PROGRAM MILK Program quantity" is displayed.
3. Release the button. The appliance starts delivering milk.
4. Once the required quantity of milk has been delivered into
the cup, press the CAPPUCCINO button again.
5. The appliance stops delivering milk and after a few
seconds the coffee is delivered into the cup. "PROGRAM
COFFEE Program quantity" is displayed.
6. Once the required quantity of coffee has been delivered
into the cup, press the CAPPUCCINO button. Coffee
delivery stops.
The machine is now reprogrammed with the new milk and
coffee quantities.

HOT WATER

Important! Danger of burns.
Never leave the machine unsupervised while delivering hot
water. The spout becomes hot during delivery. Hold by the
handle only.
1. Make sure the hot water spout is attached correctly (fig.
4).
2. Place a container under the spout (as close as possible to
avoid splashes).
3. Press the button (fig. 2). "Hot water" is displayed,
together with a progress bar which fills gradually as
preparation proceeds.
4. The machine delivers about 250 ml of hot water, then
delivery stops automatically. To interrupt delivery of hot
water manually, press the
Please note:
If "energy saving" mode is active, you may have to wait a few
seconds before the hot water is delivered.
Changing the quantity of water delivered
automatically
The machine is set by default to automatically deliver 250 ml of
hot water. To modify these quantities, proceed as follows:
1. Position a container under the spout.
2. Press and hold the
Program quantity" is displayed, then release the
button.
3. When the hot water in the cup reaches the required level,
press the button again.
The machine is now reprogrammed with the new quantity.

CLEANING

Important!
• Do not use solvents, abrasive detergents or alcohol to
clean the appliance. With De'Longhi superautomatic bean
to cup espresso and cappuccino machines, you need not
use chemical products to clean the machine.
• None of the components of the appliance can be washed
in a dishwasher with the exception of the milk container
(D).
• Do not use metal objects to remove encrustations or coffee
deposits as they could scratch metal or plastic surfaces.

Cleaning the coffee grounds container

When "EMPTY GROUNDS CONTAINER" is displayed, the grounds
container must be emptied and cleaned.
14
button again.
button until "HOT WATER