Motorola M68000 User Manual page 23

Notation for operands:
Immediate Data — Immediate data from the instruction
Source — Source contents
Destination — Destination contents
Notation for subfields and qualifiers:
<bit> of <operand> — Selects a single bit of the operand
<ea>{offset:width} — Selects a bit field
(<operand>) — The contents of the referenced location
<operand>10 — The operand is binary-coded decimal, operations are
(<address register>) — The register indirect operator
–(<address register>) — Indicates that the operand register points to the memory
(<address register>)+ — Location of the instruction operand—the optional mode
#xxx or #<data> — Immediate data that follows the instruction word(s)
Notations for operations that have two operands, written <operand> <op> <operand>,
where <op> is one of the following:
MOTOROLA M68000 8-/16-/32-BIT MICROPROCESSOR USER'S MANUAL
Freescale Semiconductor, Inc.
PC — Program counter
SR — Status register
V — Overflow condition code
Vector — Location of exception vector
+inf — Positive infinity
–inf — Negative infinity
<fmt> — Operand data format: byte (B), word (W), long (L), single
(S), double (D), extended (X), or packed (P).
FPm — One of eight floating-point data registers (always
specifies the source register)
FPn — One of eight floating-point data registers (always
specifies the destination register)
performed in decimal
qualifiers are –, +, (d), and (d, ix)
— The source operand is moved to the destination operand
— The two operands are exchanged
+ — The operands are added
– — The destination operand is subtracted from the source
operand
— The operands are multiplied
— The source operand is divided by the destination
operand
< — Relational test, true if source operand is less than
destination operand
> — Relational test, true if source operand is greater than
destination operand
V — Logical OR
— Logical exclusive OR
— Logical AND
For More Information On This Product,
Go to: www.freescale.com
2-9