Table of Contents
Advertisement
Chapter 12 Tools
Table 53 Maintenance > Tools > Firmware
LABEL
Choose...
Upload
12.1.1 Firmware Upload Screens
Do not turn off the device while firmware upload is in progress!
When the P-2024 starts to upload firmware, the Firmware Upload in Process screen appears.
Figure 47 Firmware Upload In Process
The process usually takes about two minutes. The device automatically restarts in this time.
This causes a temporary network disconnect. In some operating systems, you may see the
following icon on your desktop.
Figure 48 Network Temporarily Disconnected
After two minutes, log in again, and check your new firmware version in the Status screen.
You might have to open a new browser to log in.
If the upload is not successful, the following screen appears.
116
DESCRIPTION
Click this to find the .bin file you want to upload.
Click this to begin uploading the selected file. This may take up to two minutes.
See
Section 12.1.1 on page 116
Note: Do not turn off the device while firmware upload is in
progress!
for more information about this process.
P-2024 User's Guide
Advertisement
Table of Contents
Troubleshooting
