Table 39 Pre-defined NTP Time Servers
tock.stdtime.gov.tw
time.stdtime.gov.tw
10.3.2 Synchronizing with a Time Server
When you configure the P-2024 to get its settings from a time server, the P-2024 requests the
correct time and date settings from the time server under the following circumstances.
• When the P-2024 starts up.
• When you click Apply in the Time Setting screen.
• 24-hour intervals after starting up.
10.3.3 Time Settings Screen
To access this screen, click Maintenance > System > Time Setting.
Figure 43 Maintenance > System > Time Setting
Each field is described in the following table.
Table 40 Maintenance > System > Time Setting
LABEL
Current Time and
Date
Time and Date
Setup
Manual
P-2024 User's Guide
DESCRIPTION
This section displays the date and time currently set on the P-2024.
Select this if you want to specify the current date and time in the fields below.
Chapter 10 System
105