Dust Extraction - Clarke Woodworker CS6-9C Operating & Maintenance Manual

Curves may be sanded as shown in Fig.
9A
.
..or the belt used in the vertical position
as shown in Fig.9B.
NOTE: The work stop has been removed.

DUST EXTRACTION

Provision is made for forced dust
extraction on both the disc AND belt.
The dust extraction outlets are shown in
Fig.10 and have an outside diameter
of 56mm (2 1 / ").
4
Connect a suitable hose to a vacuum
cleaner via a reducer, or Dust Extraction
device (see your Clarke dealer).
- 11 -
Fig. 9A
Fig. 9B
Fig. 10