Table Of Contents; Guarantee; Parts & Service Contacts - Clarke Woodworker CS6-9C Operating & Maintenance Manual

Thank you for purchasing this CLARKE Belt and Disc Sander, which is designed for workshop
use and comprises a 9" dia. sanding disc and a 6" wide sanding belt.
This machine is designed for sanding WOOD ONLY. DO NOT USE for sanding asbestos, or
materials containing asbestos, painted surfaces, or materials which produce toxic dust. Do
not use for sanding magnesium as this produces a highly flammable dust.
Before attempting to operate this machine, please read this instruction manual thoroughly
and follow all directions carefully. By doing so you will ensure the safety of both yourself and
others around you, and at the same time, you should look forward to long and trouble free
service from your Sander.

GUARANTEE

This product is guaranteed against faults in manufacture for 12 months from purchase date.
Keep your receipt as proof of purchase.
This guarantee is invalid if the product has been found to have been abused in any way, or
not used for the purpose for which it was intended, or to have been tampered with in any
way. The reason for return must be clearly stated.
This guarantee does not affect your statutory rights.
CONTENTS
Guarantee ...................................................................................................... 3
Parts & Service Contacts ............................................................................... 3
General Safety Rules ...................................................................................... 4
Special Safety Rules for Belt Sanders ........................................................... 4
Electrical Connections, Fuse Rating ............................................................. 5
Pre-Assembly Check ..................................................................................... 6
Assembly ........................................................................................................ 7
Checks Before Use ......................................................................................... 7
Fitting the Table .............................................................................................. 8
Methods of Use ............................................................................................... 9
Dust Extraction ................................................................................................ 11
Maintenance .................................................................................................. 12
Accessories .................................................................................................... 13
Specifications ................................................................................................. 13
Parts List and Diagram ................................................................................... 14-15
PARTS & SERVICE
Please contact your dealer, or CLARKE International, on one of the following numbers.
PARTS & SERVICE TEL: 020 8988 7400
PARTS & SERVICE FAX: 020 8558 3622
PARTS: Parts@clarkeinternational.com
SERVICE: Service@clarkeinternational.com
or e-mail as follows:
- 3 -
PAGE