Clarke CFP-130 Operator's Manual
  1. Manuals
  2. Brands
  3. Clarke Manuals
  4. Sander
  5. CFP-130
  6. Operator's manual

Clarke CFP-130 Operator's Manual

Clarke polisher operator's manual
Hide thumbs Also See for CFP-130:
Table of Contents
  • Table of Contents
  • Clarke ® Operator's Manual- CFP Polisher
  • Operator Safety Instructions
  • Introduction
  • Accessories
  • Accesorios
  • Machine Specifications
  • How to Prepare the Machine for Operation
  • How to Operate the Machine
  • Troubleshooting
    • Funcionamiento de la Máquina
    • Detcción de Problemas
  • Assembly Drawing
  • Motor Assembly Drawing & Parts List
  • Gearbox Assembly Drawing & Parts List

Advertisement

Available languages

Available languages

Quick Links

See also: Operator's Manual
Operator's
Manual
Libro De Instrucciones
Manuel D'utilisation
READ THIS BOOK
CAUTION: Read the Operator's Manual before using the appliance.
This book has important information for the use and safe operation of this machine. Failure to read
this book prior to operating or attempting any service or maintenance procedure to your Clarke
machine could result in injury to you or to other personnel; damage to the machine or to other property
could occur as well. You must have training in the operation of this machine before using it. If your
operator cannot read this manual, have it explained fully before attempting to operate this machine.
All directions given in this book are as seen from the operator's position at the rear of the machine.
For new books write to: Clarke
Form No. 70880A 6/06
®
, 2100 Highway 265, Springdale, Arkansas 72764.
Clarke
CFP-1700
CFP-2000
CFP-2000DS
®
CFP-130
CFP-170
CFP-200
Polisher
Printed in the U.S.A.

Advertisement

Table of Contents
loading

Related Manuals for Clarke CFP-130

Summary of Contents for Clarke CFP-130

  • Page 1 This book has important information for the use and safe operation of this machine. Failure to read this book prior to operating or attempting any service or maintenance procedure to your Clarke machine could result in injury to you or to other personnel; damage to the machine or to other property could occur as well.

  • Page 2: Table Of Contents

    Motor Assembly Drawing & Parts List ... 30 Gearbox Assembly Drawing & Parts List ... 31 Motor (Dual Speed) Assembly Drawing & Parts List ... 32 Gearbox (for Dual Speed) Assembly Drawing & Parts List ... 33 ® Page -2 - Clarke Operator's Manual- CFP Polisher...

  • Page 3: Clarke ® Operator's Manual- Cfp Polisher

    Todas las indicaciones de dirección dadas en este libro están dadas desde la posición del operador en la parte de atrás de la máquina. Puede Ud. conseguir libros suplementarios dirigiéndose a su distribuidor Clarke. INDICE Instrucciones de seguridad para el operador ... 7 Presentación de la máquina ...
  • Page 4 Des versions du manuel existent en d’autres langues. Toutes les indications de direction figurant dans ce manuel sont visualisées depuis la position du conducteur, à l’arrière de la machine. Pour toute commande de manuels, adressez-vous à votre revendeur Clarke. INDEX Consignes de sécurité pour l’opérateur ... 9 Présentation de la machine ...

  • Page 5: Operator Safety Instructions

    Read all machine labels before attempting to operate. Make sure all of the labels and instructional information are attached or fastened to the machine. Get replacement labels and decals from your authorized distributor. ® Clarke Operator's Manual- CFP Polisher AVERTISSEMENT...

  • Page 6: Introduction

    The machine is heavy. Get assistance before attempting to transport or move it. NOTE: This machine is intended for commercial use. MACHINE INTRODUCTION This product is intended for commercial use; polishing, spray buffing, scrubbing, stripping and rotary carpet shampooing. Page -6 - ® Clarke Operator's Manual- CFP Polisher...
  • Page 7 Procure que los componentes eléctricos sean siempre secos. Seque cuidadosamente la máquina después de cada utilización. Guarde la máquina en un local seco. ® Clarke Operator's Manual- CFP Polisher AVERTISSEMENT ¡ AVISO !
  • Page 8 Compruebe que todos los adhesivos y las instrucciones estén colocados en los sitios previstos. Si es preciso, haga un nuevo pedido a su distribuidor Clarke. ¡ AVISO ! No use la máquina como escabel o mueble. Corre el peligro de causar lesiones o daños materiales.
  • Page 9 Risque de court-circuit si les composants électriques d’une machine ont été exposés à l’humidité ou sont mouillés. Veillez à ce que les composants électriques soient toujours secs. Essuyer soigneusement la machine après chaque utilisation. Entreposer la machine dans un local sec. ® Clarke Operator's Manual- CFP Polisher AVERTISSEMENT ¡ AVISO !
  • Page 10 Lisez toutes les indications figurant sur la machine avant la première utilisation. Vérifiez que tous les auto-collants et les instructions sont positionnés aux endroits requis . Au besoin, recommandez-en chez votre revendeur Clarke. AVERTISSEMENT Ne pas utiliser cette machine comme escabeau ou comme meuble. Risque de blessure ou de dégât matériel.

  • Page 11: Accessories

    80242A Retainer (LH Gray, fits above) 56927A WARNING: Use only brushes and accessories supplied by the manufacturer. ® Clarke Operator's Manual- CFP Polisher 5. Synthetic pads for polishing, scrubbing, stripping and spray buffing. 6. Brushes with metal or wood backs and with holes to let the solution flow through.

  • Page 12: Accesorios

    976052 ---------- ---------- ----------- ---------- 30712A 30712A 30758A 30638A 30638A 50527A 50527A 50527A 80242A 80242A 80242A 56927A 56927A 56927A Clarke 2000 200 DS 53853A 53853A 53853A ----------- 11022A ---------- 51707A 51707A 51707A 37011A 37011A 37011A ----------- ----------- ----------- ----------- -----------...
  • Page 13 AVERTISSEMENT: N'utiliser que les brosses et accessoires fournis par le fabricant. ® Operator's Manual- CFP Polisher Clarke Brosses avec dos en métal ou en bois et avec gouttières pour la dispersion de solution. Réservoir de solution Disques de ponçage Kit d’accessoires pour le lustrage par...

  • Page 14: Machine Specifications

    1 hp (0.75 kW) 1.5 hp 2 Planet 50' (15 m) Tubular Steel Die Cast Aluminum 46" (117 cm) 87 lbs. (39.5 kg) 95 lbs. (43.1 kg) Clarke CFP 1700 CFP 1700 01320A 01350A 175 rpm 145 rpm 1.5 hp (1.1 kW) 3-Planet 91 lbs.
  • Page 15 Tamaño de la almohadilla/el cepillo Potencia Transmisión Longitud del cable Tubo de la manija Base Peso con manija Peso (con cable) ® Clarke Operator's Manual- CFP Polisher CFP 170 CFP 170 01280A 01310A 12.6 175 rpm 145 rpm 1 hp (0.75 kW)
  • Page 16 145 rpm 1.5 hp (1.1 kW) 3-étages planétaires 91 lbs. (41.1 kg) CFP 2000 DS 01430A 15 /15 180 / 320 rpm 20" (51 cm) 0.9 / 1.5 hp 3-étages planétaires 81 lbs.(36.8 kg) ® Clarke Operator's Manual- CFP Polisher...
  • Page 17 NOTES ® Clarke Operator's Manual- CFP Polisher Page - 17 -...

  • Page 18: How To Prepare The Machine For Operation

    When the machine is delivered, carefully inspect the shipping carton and the machine for damage. If damage is evident, save the shipping carton so that it can be inspected. Contact the Clarke Customer Service Department. KNOW YOUR MACHINE (Figure 1)
  • Page 19 Si hay algún daño evidente, guarde la caja de embarque de modo que se la pueda inspeccionar. Comuníques con el Departamento de Atención al Cliente de Clarke. FAMILIARÍCESE CON SU MÁQUINA (Figura 1) Manijas para el operador Botón de cierre de seguridad de la palanca de...
  • Page 20 WARNING: If you use an extension cord, sortie use an extension cord with minimum wire size 12 AWG. Do not use an extension cord longer mise à la than 50 feet. Do not join two extension cords. terre Clarke ® Operator's Manual- CFP Polisher...
  • Page 21 ¡ AVISO !Use un añadido de cable de 12 AWG de sección. No use ningún añadido de más de 50 pies de largo. Nunca conecte dos añadidos. ® Clarke Operator's Manual- CFP Polisher MACHINES 120 V. INSTRUCTIONS POUR LE RACCORDEMENT ELECTRIQUE Cette machine doit être mise à...

  • Page 22: How To Operate The Machine

    Raise the Handle to go right. Lower the Handle to go left. Immediately start moving the machine back and forth. Keep the machine moving while the motor is running to avoid damage to the floor or carpet. ® Clarke Operator's Manual- CFP Polisher...
  • Page 23 Guarde la máquina en un lugar limpio y seco, con la manija para el operador (6) trabada en posición vertical. ® Operator's Manual- CFP Polisher Clarke MISE EN SERVICE DE LA MACHINE FONCTIONNEMENT (Figure 4) Désenroulez le câble d’alimentation (5) et branchez-le à une prise correctement mise à la terre.
  • Page 24 NOTES ® Page -24 - Clarke Operator's Manual- CFP Polisher...
  • Page 25 CFP Series 120V & 230V Section II Parts and Service Manual (70081A) ® Operator's Manual- CFP Polisher Page - 25 - Clarke...

  • Page 26: Troubleshooting

    • Check building circuit breaker. • Call for service. LIGHT ON 2000DS MOTOR ILLUMINATES • Stop operating machine within 6 hours • Call for service • Replace carbon motor brushes. ® Clarke Operator's Manual- CFP Polisher...

  • Page 27: Funcionamiento De La Máquina

    • Llame al servico técnico. • Reemplace las escobillas de carbón del motor. ® Operator's Manual- CFP Polisher Clarke DIAGNOSTIC TRACES SUR LE SOL APRÈS RÉCURAGE • Le sol n’est pas propre. • Solution incorrecte. • Le zone n’a pas été correctement balayée - débris sur le patin ou la brosse.

  • Page 28: Assembly Drawing

    Page -28 - Clarke ® CFP-130, 170, 1700, 200, 2000, 2000 DS Assembly Drawing 9/05 19 18 ® Operator's Manual- CFP Polisher Clarke...
  • Page 29 CFP-130, 170, 1700, 200, 2000, 2000 DS Ref. Part No. 21075A 10687A 21074A 71020A 80284A 61373A 40788A 467504 47711A 50781A 40789A 56057675 Grip, Handle 441401 441301 461404 53662A 980349 920342 71168A 71021A 71022A 71023A 71024A 71025A 71026A 71027A 14 I...

  • Page 30: Motor Assembly Drawing & Parts List

    53848A Plate, Mounting 80141A Screw, 10-32 x 1 911177 Wire Nut - Orange Page -30 - ® Clarke CFP-130,170, 1700, 200, 2000 START 130,170, 200 170, 200 120 / 60 230 / 50 40761A 40762A 1700, 2000 1700 120 / 60...

  • Page 31: Gearbox Assembly Drawing & Parts List

    NOTE: Use 9 ounces of grease in Gearbox 53645A and 8 ounces of grease in Gearbox 53646A ® Clarke Operator's Manual- CFP Polisher ® Clarke CFP-130, 170, 1700, 200, 2000 130, 170, 200 170, 200 120 / 60 53645A 1700, 2000 1700 230 / 50...
  • Page 32 Motor Assembly Drawing, Parts List and Schematic 5/06 Page -32 - ® Clarke CFP-2000DS Part No. Description 50717A Thru-Bolt Commutator Bracket 56282A Hex Nut 912287 Rectifier, Bridge 962399 Screw, 8-32 x 1 1/4 448396 Spring (Included with #8) 51405A Brush Asm., (Included w/#8) 51435A Brush Board Asm.
  • Page 33 Gearbox Assembly Drawing & Parts List 9/05 NOTE: Gearbox 53647A uses 8 ounces of grease ® Operator's Manual- CFP Polisher Clarke Clarke ® CFP-2000DS GEARBOX 53647A Part No. Description 80141A Screw, 10-32 x 1 56922A Retainer, Bearing 902606 Bearing, Ball - 6002...
  • Page 34 NOTES...
  • Page 35 ® American Lincoln / Clarke, Madison Heights, Michigan 48071-0158 29815 John R. (810) 544-6300 American Lincoln ® / Clarke, Marietta, Georgia 30066 1455 Canton Road (770) 973-5225 ® Clarke Clarke American Sanders A.L. Cook Customer Service Headquarters and Factory 2100 Highway 265...
  • Page 36 72764, for the nearest authorized Clarke repair location. Only these locations are authorized to make repairs to the product under this warranty. (b) Return the product to the nearest Clarke repair location. Transportation charges to and from the repair location must be prepaid by the purchaser. Clarke will repair the product and/or replace any defective parts without charge within a reasonable time after receipt of the product.

This manual is also suitable for:

Cfp-200Cfp-2000Cfp-2000dsCfp-170Cfp-1700

Table of Contents