Table of Contents
Advertisement
BEFORE USE
The sander is supplied with the following items:
• 3 x P60 grit hook and loop sanding sheets
• 3 x P120 grit hook and loop sanding sheets
• 3 x P240 grit hook and loop sanding sheets
• Dust collection box/filter assembly
DUST EXTRACTION
WARNING: HARMFUL OR TOXIC DUST MAY BE PRODUCED WHEN
SANDING LEAD PAINTED SURFACES, WOODS OR METAL. CONTACT WITH,
OR INHALATION OF THESE DUSTS CAN ENDANGER THE HEALTH OF THE
OPERATOR OR BYSTANDERS. CERTAIN DUSTS LIKE OAK AND BEECH ARE
CONSIDERED TO BE CANCEROUS IN CONJUNCTION WITH ADDITIVES IN
WOOD TREATMENTS (CHROMATE, WOOD PRESERVATIVES). ASBESTOS-
CONTAINING MATERIALS MAY ONLY BE HANDLED BY EXPERTS.
WARNING: - USE A DUST EXTRACTION DEVICE OR A VACUUM CLEANER.
WARNING: - WORK IN A WELL VENTILATED ROOM. - THE USE OF A DUST
MASK FILTER CLASS P2 IS RECOMMENDED. - OBSERVE LOCAL
REGULATIONS REGARDING THE HANDLING OF CERTAIN MATERIALS.
FITTING THE DUST FILTER
1. Attach the dust filter by pushing
the filter onto the rear of the
sander as far as it will go and then
twisting clockwise until it locks into
place.
• The filter housing has lugs to
align and secure it. Note their
position matches those on the
sander body before assembly.
NOTE: The user should still wear a
face mask to prevent the inhalation of dust particles.
NOTE: Due to the nature of the sander some of the dust produced will be
forced into the surrounding atmosphere and will not be collected.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
7
Advertisement
Table of Contents
