Polycom SoundPoint IP 450 User Guide
Joining Conferences
Splitting Conference Calls
Ending Conference Calls
Transferring Calls
24
To join two conferences:
Previously you set up two separate calls. Only one conference can be active at
a time.
>> From the either call (the one on hold or the active one), press the Join soft
key.
Both calls are joined into a single three-way conference.
To split a conference call:
>> From the Active Conference page, press the More soft key, and then the
Split soft key to split the conference.
All calls are split into individual calls and put on hold.
To end a conference call:
>> From the Active Conference page, press the End Call soft key or hang up.
The other parties my or may not continue to be connected. The behavior
after the conference host hangs up is configurable by your system
administrator.
A call can be transferred in one of three ways:
•
Consultative transfer—The party to whom you want to transfer the call
answers their phone before you transfer the call or hang up. You can
consult with them before completing the transfer.
— See
Performing a Consultative Transfer
•
Blind transfer—The call is automatically transferred after you dial the
number of the party to whom you want to transfer the call.
— See
Performing a Blind Transfer
on page 25.
on page 26.