Joining Conferences
To join two conferences:
Previously you set up two separate calls. Only one conference can be active ata
time.
>> From the either call (the one on hold or the active one), press the Join
soft key.
Both calls are joined into a single three-way conference.
Splitting Conference Calls
To split a conference call:
>> From the Active Conference page, press the More soft key, and then
the Split soft key to split the conference.
All calls are split into individual calls and put on hold.
Ending Conference Calls
To end a conference call:
>> From the Active Conference page, press the EndCall soft key or hang
up.
The other parties will continue to be connected.
Transferring Calls
A call can be transferred in one of three ways:
• Consultative transfer—The party to whom you want to transfer the call answers
their phone before you transfer the call or hang up. You canconsult with them
before completing the transfer.
•Blind transfer—The call is automatically transferred after you dial the
number of the party to whom you want to transfer the call.
7. Select Maximum Intensity.
8. Press the Up or Down soft keys to increase or decrease the backlightintensity.
9. Press the Ok soft key.
10. Press
to return to the idle screen.
Enabling the Headset Memory Mode
This feature is especially useful for permanent or full - time headset users.
To permanently enable the Headset Memory Mode:
1. Press
.
2. Select Settings > Basic > Preferences > Headset... > Headset Memory.. .
3. Scroll to select Enabled, and then press the Select soft key.
4. Press
to return to the idle screen.
Repeat steps 1 to 4 to select Disabled and turn Headset Memory Mode off.
To activate Headset Memory Mode:
>> Press
twice.
The flashing headset icon on the screen or a flashing headset key indicates thatthe
headset mode is activated. Pressing
will now connect to your headset automatically.
or the Answer soft key to receive a call