Joining Conferences; Splitting Conference Calls; Ending Conference Calls; Transferring Calls - Polycom SOUNDPOINT IP 450 User Manual

User Guide for the SoundPoint IP 450 Desktop Phone

Joining Conferences

Splitting Conference Calls

Ending Conference Calls

Transferring Calls

3 - 14
To join two conferences:
Previously you set up two separate calls. Only one conference can be active at
a time.
From the either call (the one on hold or the active one), press the Join soft
>>
key.
Both calls are joined into a single three-way conference.
To split a conference call:
From the Active Conference page, press the More soft key, and then the
>>
Split soft key to split the conference.
All calls are split into individual calls and put on hold.
To end a conference call:
From the Active Conference page, press the EndCall soft key or hang up.
>>
The other parties will continue to be connected.
A call can be transferred in one of three ways:
• Consultative transfer—The party to whom you want to transfer the call
answers their phone before you transfer the call or hang up. You can
consult with them before completing the transfer.
— Refer to Performing a Consultative Transfer
• Blind transfer—The call is automatically transferred after you dial the
number of the party to whom you want to transfer the call.
— Refer to Performing a Blind Transfer
• Attended transfer—The parties are automatically connected to each other
after you exit the conference.
on page 3-15.
on page 3-15.