Access To Screens And Systems - Polycom SoundPoint IP 450 User Manual

Polycom SoundPoint IP 450 User Guide

Access to Screens and Systems

Symptom
There is no response when you
press a feature key.
The screen shows "Network Link
is Down".
86
Problem
The SoundPoint IP 450 phone is
not in an active state.
The LAN cable is not properly
connected.
Corrective Action
Do one of the following:
• Press the keys more slowly.
• Check with your system administrator
to see if the key has been mapped to
a different function or is disabled.
• Place a call to the phone to check that
inbound call display and ringing is
normal. If successful, try to press
feature keys within the call to access
the Main Menu, for example.
• To confirm that the line is active, press
the Menu key, and then select Status
> Lines > Line Information. From the
Line Information page, verify that your
phone line is registered.
• Contact your system administrator
about restarting the phone to attempt
re-registration to the call server.
Do one of the following:
• Check termination at the switch or hub
(furthest end of the cable from the
phone).
• Check that the switch or hub is
operational (flashing link/status lights)
or contact your system administrator.
• Check if the LAN port is active or
inactive. Press the Menu key, and
then select Status > Network >
Ethernet. From the Ethernet page,
scroll to the LAN port field and verify
that it is active.
• Contact your system administrator
about restarting the phone to attempt
re-registration to the call server.