Foxconn Renaissance User Manual page 95

6. It will skip "Strip Size" menu for RAID1.
Intel(R) Matrix Storage Manager option ROM v8.5.0.1030 ICH10R/D0 wRAID5 Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
7. In "Capacity" item, use the default value, and press <Enter>. The size of the smaller
hard disk 232.9GB is becoming the default value, and it indicates the maximum
capacity.
8. Select "Create Volume" and press <Enter>. A warning message will appear :
Press <Y> to create the volume and return to the main menu.
Intel(R) Matrix Storage Manager option ROM v8.5.0.1030 ICH10R/D0 wRAID5 Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
1. Create RAID Volume
1. Create RAID Volume
2. Delete RAID Volume
RAID Volume :
ID Name
0 TryRAID1
Physical Disks:
Port Drive Model
0 WDC WD2500JS-60N WD-WCANKC865380 232.9GB
2 Maxtor 6L250S0
4 ST3320620SV
5 ST3300831AS
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved. Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
[ CREATE VOLUME MENU
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
The default value indicates the maximum capacity using the selected
disks. Entering a lower capacity allows you to create a second
volume on these disks
[↑↓]-Change [TAB]-Next
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume ? (Y/N) :
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved. Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
[
[ DISK/VOLUME INFORMATION
Level
RAID1(Mirror)
Serial #
L50SKP4G
9QF4YJGQ
3NF02XH2
[↑↓]-Select [ESC]-Exit
]
TryRAID0
RAID0(Stripe)
Select Disks
N/A
232.9 465.8 GB
Create Volume
[ HELP ]
[ESC]-Previous Menu [ENTER]-Select
MAIN MENU ]
3. Reset Disks to Non-RAID
4. Exit
]
Stripe Size Status
N/A 232.9GB Normal
Size Type/Status(Vol ID)
Non-RAID Disk
232.9GB Member Disk(0)
298.1GB Member Disk(0)
279.5GB Non-RAID Disk
[ENTER]-Select Menu
88
* = Data is Encrypted
Bootable
Yes