Foxconn Renaissance User Manual page 120

2. Align and firmly insert the 2-way SLI bridge onto the edge connector of each graphics
card. Make sure that the bridge is firmly in place.
3. Connect power extension cable from the power supply to the graphics card power
connector separately.
4. Connect a monitor DVI-I cable to the graphics card.
2-2 Installing three SLI-ready graphics cards
1. Install the first graphics card into the PCI-E1_16X slot, the second into the PCI-E2_
16X slot, and the third into the PCI-E2_8X slot. (You can refer to the 3-way and 2-way
graphics card Speed Table for different combinations.)
2. Align and firmly insert the 3-way SLI bridge onto the edge connector of each graphics
card. Make sure that the bridge is firmly in place.
3. Connect power extension cable from the power supply to the graphics card power
connector separately.
4. Connect a monitor DVI-I cable to the graphics card.
!
Three way SLI is supported for single size VGA card only. For double size VGA card,
only two way SLI is supported due to space limitation.
113