Install A New Windows Xp - Foxconn M61PMP-K User Manual

Creating a Bootable Array-
5-4
Assume a Mirrored array (232.88GB) was created as introduced in section 5-3, after
the system restarts :
1. Press [DEL] to enter BIOS Setup during POST.
2. Insert the Windows installation CD into the optical drive.
3. Set the "First Boot Device" to "CDROM", save changes and exit BIOS.
► Removable Device Priority
► Hard Disk Boot Priority
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Boot Up Floppy Seek
Boot Up NumLock Status
Security Option
Full Screen Logo Show
↑↓→←:Move Enter:Select
4. The computer will reboot, and it will start installing Windows Operating System.
Watch the screen carefully, when the following picture appears, press [F6] key
immediately. If you forgot to do this, PC will go to an fatal blue screen, and you
may need to reboot the system again. PC may not respond to your [F6] input
immediately, and it keeps loading files until the next screen displays.
Windows Setup
Press F6 if you need to install a 3rd party SCSI or RAID driver.
Phoenix - AwardBIOS CMOS Setup Utility
Advanced BIOS Features
[Press Enter]
[Press Enter]
[ CDROM]
CDROM
[Hard Disk]
[Removable]
[Enabled]
[Disabled]
[On]
[Setup]
[Enabled]
+/-/PU/PD:Value
F5: Previous Values
87

Install a New Windows XP

Item Help
Menu Level ►
Select removable boot
device priority
F10:Save ESC:Exit F1:General Help
F7: Optimized Defaults