Create Raid Driver Diskette - Foxconn M61PMP-K User Manual

5-1 Create RAID Driver Diskette

If you want to install a brand new Windows XP on a RAID system, you need to create a
RAID driver floppy diskette which will be used during Windows XP installation later.
1. Find a PC, put a diskette into its floppy drive A:, this diskette will be formatted later.
Put the driver CD into your DVD-ROM drive and go to Driver\Common\RAID, click
on RAIDflpy.txt.
2. A message pops out telling you where to
find the routine in driver CD to create the
driver diskette.
3. Depending on which platform your XP
system is, normally, it is a 32-bit system.
Use Windows explorer, and go to
Driver\NVIDIA\MCP61\Chipset\WinXP\
32bit\IDe\WinXP\sataraid, click on
RaidTool icon to start the creation.
4. Click "GO" to start.
5. Select the desired destination FDD drive.
It can be the default drive A: or any USB
FDD. Click "OK" to continue.
6. Insert a diskette, click "OK" to continue.
CD:\
69