Foxconn M61PMP-K User Manual
  1. Manuals
  2. Brands
  3. Foxconn Manuals
  4. Motherboard
  5. M61PMP-K
  6. User manual

Foxconn M61PMP-K User Manual

English manual.
Hide thumbs
Table of Contents

Advertisement

Quick Links

M61PMP Series Motherboard
User's Manual

Advertisement

Table of Contents
loading

Related Manuals for Foxconn M61PMP-K

Summary of Contents for Foxconn M61PMP-K

  • Page 1 M61PMP Series Motherboard User’s Manual...
  • Page 2 Statement: This manual is the intellectual property of Foxconn, Inc. Although the information in this manual may be changed or modified at any time, Foxconn does not obligate itself to inform the user of these changes. Trademark: All trademarks are the property of their respective owners.

  • Page 3: Declaration Of Conformity

    HON HAI PRECISION INDUSTRY COMPANY LTD 66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT, TAIPEI HSIEN, TAIWAN, R.O.C. declares that the product Motherboard M61PMP/M61PMP-K is in conformity with (reference to the specification under which conformity is declared in accordance with 89/336 EEC-EMC Directive) ■...
  • Page 4 Declaration of conformity Trade Name: FOXCONN M61PMP/M61PMP-K Model Name: Responsible Party: PCE Industry Inc. Address: 458 E. Lambert Rd. Fullerton, CA 92835 Telephone: 714-738-8868 Facsimile: 714-738-8838 Equipment Classification: FCC Class B Subassembly Type of Product: Motherboard Manufacturer: HON HAI PRECISION INDUSTRY...

  • Page 5: Installation Precautions

    Installation Precautions ■ Electrostatic discharge (ESD) is the sudden and momentary electric current that flows between two objects at different electrical potentials. Normally it comes out as a spark which will quickly damage your electronic equipment. Please wear an electrostatic discharge (ESD) wrist strap when handling components such as a motherboard, CPU or memory.

  • Page 6: Table Of Contents

    TAble of CoNTeNTS Chapter 1 Product Introduction Product Specifications ..............2 Layout ................... 4 Back Panel Connectors ..............5 Chapter 2 Hardware Install Install the CPU and CPU Cooler ..........8 Install the Memory ..............10 Install an Expansion Card ............12 Install other Internal Connectors ..........
  • Page 7 Fan Control ................52 FOX LiveUpdate Local Update ................. 53 Online Update ............... 55 Configure ................58 About & Help ................. 60 FOX LOGO ................. 61 FOX DMI ..................62 Chapter 5 RAID Configuration RAID Configuration Introduction ..........65 NVIDIA® MediaShield Driver ............. 67 Create RAID Driver Diskette ............
  • Page 8 Thank you for buying Foxconn M61PMP Series motherboard. Foxconn products are engineered to maximize computing power, providing only what you need for break-through performance. With advanced overclocking capability and a range of connectivity features for today multi-media computing requirements, M61PMP /M61PP-K enables you to unleash more power from your compu- ter.

  • Page 9: Product Specifications

    Dual channel DDR3 1333/1066/800MHz architecture Audio ALC662 audio chip 2/4/5.1--Channel Realtek 10/100Mb/s LAN chip (M61PMP) Realtek 10/100/1000Mb/s LAN chip (M61PMP-K) Expansion Slots 1 x PCI Express x16 slot 1 x PCI Express x1 slot 2 x PCI slots Onboard Serial ATA...
  • Page 10 6-channel Audio ports Hardware Monitor System voltage detection CPU/System temperature detection CPU/System fan speed detection CPU/System overheating warning CPU/System fan speed control PCI Express x1 Support 250MB/s (500MB/s concurrent) bandwidth Low power consumption and power management features PCI Express x16 Support 4GB/s (8GB/s concurrent) bandwidth Low power consumption and power management features Green Function...

  • Page 11: Layout

    1-2 layout 1. 4-pin ATX 12V Power Connector 12. Front Panel Connector 2. Chassis Intrusion Alarm Header 13. Front USB Connectors 3. System Fan Header 14. Clear CMOS Jumper 4. IrDA Connector 15. SATA Connectors 5. PCI Express x16 Slot 16.

  • Page 12: Back Panel Connectors

    1-3 back Panel Connectors PS/2 Mouse Port Parallel Port LAN Port Line In Line Out Microphone PS/2 Keyboard Port Serial Port VGA Port USB Ports Audio Ports 1. PS/2 Mouse Port Use the upper port (green) to connect a PS/2 mouse. 2.
  • Page 13 8. RJ-45 lAN Port The Ethernet LAN port provides Internet connection at up to 10/100Mb/s(M61PMP) or 10/100/1000Mb/s (M61PMP-K) data rate. Active Link Left: Active Right: Link LAN Type Status Description Status Description No Link No Link 100M Green Orange 10/100Mb/s...
  • Page 14 This chapter introduces the hardware installation process, including the installation of the CPU, memory, power supply, slots, pin headers and the mounting of jumpers. Caution should be exercised during the installation of these modules. Please refer to the motherboard layout prior to any installation and read the contents in this chapter carefully.

  • Page 15: Install The Cpu And Cpu Cooler

    2-1 Install the CPU and CPU Cooler Read the following guidelines before you begin to install the CPU : ■ Make sure that the motherboard supports the CPU. ■ Always turn off the computer and unplug the power cord from the power supply before installing the CPU to prevent hardware damage.

  • Page 16: Install The Cpu Cooler

    CPU socket lever back to its locked position. Install the CPU Cooler Follow the steps below to correctly install the CPU cooler. (The following procedures use Foxconn cooler as the example.) 2. Buckle the heatsink firmly at one 1.

  • Page 17: Install The Memory

    2-2 Install the Memory Read the following guidelines before you begin to install the memory : ■ Make sure that the motherboard supports the memory. It is recommended that memory of the same capacity, brand, speed, and chips be used. ■...

  • Page 18: Installing A Memory

    Installing a Memory Before installing a memory module, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the memory module. Be sure to install DDR3 DIMMs on this motherboard. Notch If you take a look at front side of memory module, it has asymmetric pin counts on both sides separated by a notch in the middle, so it can only fit in one direction.

  • Page 19: Install An Expansion Card

    2-3 Install an expansion Card ■ Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card. ■ Always turn off the computer and unplug the power cord from the power outlet before installing an expansion card to prevent hardware damage.

  • Page 20: Install Other Internal Connectors

    2-4 Install other Internal Connectors Power Connectors This motherboard uses an ATX power supply. In order not to damage any device, make sure all the devices have been installed properly before applying the power supply. 24-pin ATX power connector : PWR1 PWR1 is the ATX power supply connector.
  • Page 21 front Panel Connector : fP1 This motherboard includes one connector for connecting the front panel switch and LED Indicators. HDD-LED PWR-LED Hard Disk leD Connector (HDD-leD) RESET-SW PWR-SW Connect to the chassis front panel IDE indicator LED. It EMPTY indicates the active status of the hard disks. This 2-pin connector is directional with +/- sign.
  • Page 22 PORT1_L AUD_GND Audio Connector : f_AUDIo PORT1_R PRESENCE_J PORT2_R SENSE1_RETURN The audio connector supports HD Audio standard. SENSE_SEND EMPTY It provides the Front Audio output choice. PORT2_L SENSE2_RETURN F_AUDIO Audio Connector : CD_IN CD_L GND CD_R CD_IN is a Sony standard audio connector, it can be connected to a CD/DVD-ROM drive through a CD/DVD audio cable.

  • Page 23: Jumpers

    2-5 Jumpers For some features needed, users can change the jumper settings on this motherboard to modify them. This section explains how to use the various functions of this motherboard by changing the jumper settings. Users should read the following content carefully prior to modifying any jumper setting. Description of Jumpers 1.
  • Page 24 This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. You have to run the Setup Program when the following cases oc- cur: 1. An error message appears on the screen during the system Power On Self Test (POST) process.

  • Page 25: Enter Bios Setup

    enter bIoS Setup The BIOS is the communication bridge between hardware and software, correctly setting up the BIOS parameters is critical to maintain optimal system performance. Power on the computer, when the message "Press <Del> to enter Setup, <eSC> to boot menu". appears at the bottom of the screen, you can press <DEL>...
  • Page 26 ► Power Management Setup All the items related with Green function features can be set up through this menu. ► PC Health Status This setup enables you to read/change Fan speeds, and displays temperatures and voltages of your CPU/System. ► BIOS Security Features The Supervisor/User password can be set up through this menu to prevent unauthorized use of your computer.

  • Page 27: System Information

    [1.44 MB 3 change system Time Halt On [All Errors, But ...] Keyboard [Disabled] Mouse [Disabled] Model Name : M61PMP/M61PMP-K BIOS ID :966F1B10 BIOS Version :08.00.15 CPU Name : AMD Phenom(tm) II X3 705e Processor ↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit...
  • Page 28 condition can be enabled/disabled in the next three settings. ► Keyboard The system boot will not stop for a keyboard error if you enabled this item. ► Mouse The system boot will not stop for a mouse error if you enabled this item. ►...

  • Page 29: Advanced Bios Features

    Advanced BIOS Features CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. Advanced BIOS Features IDE Detect Time Out [35] [35] Help Item MPS Revision [1.1] Quick Boot [Enabled] Select the time out Quiet Boot [Enabled] value for detecting Bootup Num-Lock [On] ATA/ATAPI device(s)

  • Page 30: Fox Central Control Unit

    <->; you can exit this menu by pressing <Esc>. ► Removable Drives This option is used to specify the boot priority sequence from available removable drives. fox Central Control Unit CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. Fox Central Control Unit [Press Enter] ►...

  • Page 31: Fox Intelligent Stepping

    ► Smart Power LED Smart Power LED is a feature built on your motherboard to indicate different states during Power On System Test (POST). The LED is located at the front panel, and it displays POST state by different long-short blinking intervals. You can always leave this state enabled. System Status Power LED Status Stop Blinking Condition...

  • Page 32: Cpu Configuration

    CPU Configuration CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. CPU Configuration CPU Configuration Help Item Module Version : 14.14 AGESA Version : 6.1.3.0 Enable/disable the Physical Count : 1 generation of ACPI Logical Count : 3 _PPC, _PSS, and _PCT objects .

  • Page 33: Advanced Chipset Features

    ► Flash Write Protection This item is used to enable/disable to the flash write protection. Advanced Chipset Features CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. Advanced Chipset Features Northbridge Chipset Configuration Help Item ► Memory Configuration [Press Enter] [Press Enter] ►...

  • Page 34: Memory Configuration

    ► OnChip VGA Frame Buffer Size Allocates system memory for use as video memory to ensure the most efficient use of avail- able resources for maximum 2D/3D graphics performance. This is a memory allocation method addition to the Unified Memory Architecture (UMA) concept, wherein a static amount of page-locked graphics memory is allocated during driver initialization.

  • Page 35: Dram Timing Configuration

    (64-bit DRAM data width) DRAM modes : Ganged channels (DDR3) : ■ DCT channels A and B can be ganged as a single logical 128-bit DIMM. ■ Offers highest DDR3 bandwidth. ■ Requires both DIMMs in a logical pair to have identical size and timing parameters, both DCTs programmed identically.

  • Page 36: Integrated Peripherals

    Integrated Peripherals CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. Integrated Peripherals ► IDE Configuration [Press Enter] [Press Enter] Help Item ► USB Configuration [Press Enter] ► SuperIO Configuration [Press Enter] Configure the IDE devices. ► Onboard Devices [Press Enter] ↑↓←→:Move Enter:Select +/-/:Value...

  • Page 37: Usb Configuration

    [Disabled] : Disable SATA controller 1 and 2, SATA devices are unusable. [Device 0] : Enable SATA controller 1, SATA port 1 and SATA port 2 are usable. [Device 0/1] : Enable SATA controller 1 and 2, SATA port1/2/3/4 are usable. ►...

  • Page 38: Superio Configuration

    SuperIO Configuration CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. SuperIO Configuration Configure ITE8716 Super IO Chipset Help Item OnBoard Floppy Controller [Enabled] [Enabled] Allows BIOS to enable Serial Port1 Address [3F8/IRQ4] or disable floppy IR Address [2F8/IRQ3] controller.

  • Page 39: Onboard Devices

    Onboard Devices CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. Ondoard Devices AZALIA AUDIO [Auto] Help Item Onboard LAN Controller [Enabled] Options Onboard LAN Boot ROM [Disabled] Auto Disabled ↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ►...

  • Page 40: Power Management Setup

    Power Management Setup CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. Power Management Setup Suspend mode [S3 (STR)] Help Item [S3 (STR)] PWRON after PWR-Fail [Power Off] Resume by PCI Card [Disabled] Select the ACPI Resume by PCIE Card [Disabled] State used for Resume by USB Devices...
  • Page 41 ► Suspend mode This item is used to set the energy saving mode of the ACPI function. When you select “S1 (POS)” mode, the power is always on and computer can be resumed at any time. When you select “S3 (STR)” mode, the power will be down after a period of time. The status of the computer before it entering STR will be saved in memory, and the computer can quickly return to previous state when the STR function wakes.

  • Page 42: Pc Health Status

    PC Health Status CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. PC Health Status Case Open Warning [Disabled] Help Item [Disabled] Shut Down Temperature [Disabled] Options CPU Temperature C/104 System Temperature C/87 Disabled CPU Fan Speed :2184 RPM Enabled System Fan Speed :N/A...

  • Page 43: Bios Security Features

    bIoS Security features CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. BIOS Security Features Security Settings Help Item Supervisor Password : Not Installed Enter or change the User Password : Not Installed password. [Press Enter] Change Supervisor Password [Press Enter] Change User Password [Press Enter]...

  • Page 44: Load Optimal Defaults

    load optimal Defaults Optimal defaults are the best settings of this motherboard. Always load the Optimal defaults after updating the BIOS or after clearing the CMOS Load Optimal Defaults? values. Select this option and press Enter, it will pop out a dialogue box to let [OK] [OK] [Cancel]...
  • Page 45 The utility CD that came with the motherboard contains useful software and several utility drivers that enhance the motherboard features. This chapter includes the following information: ■ Utility CD content ■ Install driver and utility ■ FOX ONE ■ FOX LiveUpdate ■...

  • Page 46: Utility Cd Content

    Utility CD content This motherboard comes with one DVD. You can simply put it into your DVD-ROM drive, and the main menu will be displayed on your PC screen to guide you how to install. 1. Install Driver Use these options to install all the drivers for your system. You should install the drivers in order, and you need to restart your computer after all the drivers have been installed.

  • Page 47: Install Driver And Utility

    Step Automatic Installation by One Click. Exit the program Drop to System Tray Click to visit Select to Select to Browse CD Foxconn's Install Utilities Install Drivers website 2. Install Utility You can select the specific utility to install.

  • Page 48: Fox One

    foX oNe FOX ONE is a powerful utility for easily modifying system settings. It also allows users to monitor various temperature values, voltage values, frequencies and fan speeds at any time. With FOX ONE, you can : ■ Modify system performance settings, such as the CPU and memory bus speeds, CPU voltages, fan speeds, and other system performance options.

  • Page 49: Main Page

    1. Main Page Show CPU Toolbar Information Alert Lamp Switch Button Skin Button Exit Minimum Configuration Homepage Monitor Frequency/Voltage/Fan speed/Temperature value Toolbar Use the toolbar to navigate to other pages. Alert lamp When the system is in healthy state, the color of alert lamp is green. When the system is in abnormal state, the alert lamp color is red.
  • Page 50 Click this button to exit the program. Minimum Click this button to drop the FOX ONE to Windows system tray located at the lower right corner of your screen. Homepage Click this button to visit Foxconn motherboard website : http://www.foxconnchannel.com...
  • Page 51 Configuration This menu allows you to configure : 1). Monitor interval (ms) : This is to define the interval of different messages of system settings which are to be displayed on Simple Mode screen. Minimum value is 1 second. 2). Simple Mode : To select which message of system settings are to be displayed in the Simple Mode.
  • Page 52 Step 1 : Click Calibration icon, a message pops out to ask for continue. Select Yes. Step 2 : After data is collected, it will ask you to restart your computer now. Later on, when the FOX ONE program is activated, and F.I.S. feature (in CPU Page) is also enabled, FOX ONE will automatically adjust your CPU clock according to your system loadings.

  • Page 53: Cpu Control

    2. CPU Page - CPU Control This page lets you select (or overclock) CPU clock to meet the current performance level of the system. The fastest and suitable CPU clock running for current system can be calculated by FOX ONE automatically or manually input by yourselves. Manual : You can press the up/down button to adjust your CPU clock.
  • Page 54 You can see the system is raising CPU clock until the system hangs. Push RESET button on the front panel of your system to restart the computer. Run FOX ONE program again, it will inform you the previous test found that 255MHz is the recommended CPU clock for your system.

  • Page 55: Frequency Control

    FOX Intelligent Stepping (F.I.S., Optional) Select FOX Intelligent Stepping will allow your system to automatically adjust your CPU clock rate based on different system loadings. For example, if you select Power Gaming, CPU clock will be driven to run at its maximum speed. While in Energy Saving, CPU will lower down its speed to a minimum.

  • Page 56: Limit Setting

    4. Limit Setting 4.1 Limit Setting - CPU Temperature This page lets you to set CPU high limit temperature and enable the alert function. Go to Limit Setting Show current CPU page temperature value Enable alert function when the CPU temperature is higher than high limit value Show current high...
  • Page 57 4.3 Limit Setting - CPU Fan This page lets you to set CPU fan low limit rpm and enable the alert function. Show current CPU fan rpm value Enable alert function when the CPU fan runs slower than the low limit rpm value Show current low limit rpm value of CPU fan...

  • Page 58: Voltage Control

    4.5 Limit Setting - FAN1 Fan This page lets you to set FAN1 fan low limit rpm and enable the alert function. Show current FAN1 fan rpm value Enable alert function when the FAN1 fan runs slower than low limit rpm value Show current low limit rpm value of FAN1 fan Set low limit rpm by...

  • Page 59: Fan Control

    6. Fan Page - Fan Control This page lets you enable Smart Fan function or set the fan speed by manual. When Smart Fan is selected, you must use a 4-pin CPU cooler in your system. Go to Fan page Enable or disable smart fan function Set fan speed by...

  • Page 60: Fox Liveupdate

    FOX LiveUpdate FOX LiveUpdate is a useful utility to backup and update your system BIOS, drivers and utilities by local or online. Supporting Operating Systems : ■ Windows 2000 ■ Windows XP (32-bit and 64-bit) ■ Windows 2003 (32-bit and 64-bit) ■...
  • Page 61 1-2 local Update - backup This page can backup your system BIOS. You can click “Backup”, and key in a file name, then click “Save” to finish the backup operation. The extension of this backup file is ".BIN" for Award BIOS and ".ROM"...

  • Page 62: Online Update

    2. online Update 2-1 online Update - Update bIoS This page lets you update your system BIOS from Internet. Click “start”, it will search the new BIOS from Internet. Then follow the wizard to finish the update operation. Click here Current information Search new BIOS from Internet...
  • Page 63 Select the driver to update Browse detailed information Install the selected driver Close the window 2-3 online Update - Update Utility This page lets you update utilities from Internet. Click “start”, it will search the new utilities from Internet. Then follow the wizard to finish the update operation. Click here Current information Search new utilities...
  • Page 64 2-4 online Update - Update All This page lets you update your system drivers from Internet. Click “start”, it will search all new BIOS/drivers/utilities from Internet. Then follow the wizard to finish the update operation. Click here Current information Search all new BIOS/ drivers/utilities from Internet Browse detailed...

  • Page 65: Configure

    3. Configure 3-1 Configure - option This page lets you set auto search options. After you enable the auto search function, FOX LiveUpdate will start its searching from Internet and if any qualified item found, it will pop out a message on the task bar to inform you to do the next step.
  • Page 66 When you enable "Auto Search FOX LiveUpdate", if your FOX LiveUpdate version is older, it will auto search from internet and prompt you to install the new version. Prompt you to install the new FOX LiveUpdate 3-2 Configure - System This page lets you set the backup BIOS location and change different skin of the FOX LiveUpdate utility.

  • Page 67: About & Help

    3-3 Configure - Advance This page lets you select to flash BIOS / Boot Block and clear CMOS. If you choose Flash Boot Block, it means BIOS is not protective, and you must make sure the flash process is continuous and without any interruption.

  • Page 68: Fox Logo

    foX loGo FOX LOGO is a simple and useful utility to backup, change and delete the boot time Logo. The boot Logo is the image that appears on screen during POST (Power-On Self-Test). You can prepare a JPG image (1024x768) file, then use FOX LOGO to open it and change the boot time Logo.

  • Page 69: Fox Dmi

    foX DMI FOX DMI is a full Desktop Management Interface viewer, and it provides three DMI data formats : Report, Data Fields and Memory Dump. With DMI information, system maker can easily analyze and troubleshoot your motherboard if there is any problem occurred. Supporting Operating Systems : ■...
  • Page 70 This chapter will cover two topics : ■ Creating a Bootable Array - Installing a new Windows XP (Vista) in a brand new RAID system. ■ Creating a Non-Bootable Array - Existing Windows XP (Vista) system with new RAID built as data storage. It includes the following information : ■...

  • Page 71: Creating A Non-Bootable Array - Existing Windows Xp (Or Vista)

    Creating a Bootable Array - Installing a new Windows XP (or Vista) in a brand new RAID system. 1. Follow 5-1 to create two RAID driver diskettes. 2. Follow 5-2 to set RAID enabled in BIOS. 3. Follow 5-3 to select a RAID array for use. 4.

  • Page 72: Raid Configuration Introduction

    RAID Configuration Introduction RAID (Redundant Array of Independent Disks) is a method for computer data storage schemes that divide and/or replicate data among multiple hard drives. RAID can be designed to provide increased data reliability (fault tolerance) or increased I/O (input/ output) performance, or both.
  • Page 73 RAID 0 (Striped) RAID 0 reads and writes sectors of data interleaved among multiple drives. If any disk member fails, it affects the entire array. The disk array data capacity is equal to the number of drive members times the capacity of the smallest member. RAID 0 does not support fault tolerance.

  • Page 74: Nvidia® Mediashield Driver

    NVIDIA MediaShield Driver ® The NVIDIA MediaShield driver supports RAID 0, RAID 1, RAID 5, and RAID 0+1 ® functions. It allows you to get high performance with fault tolerance, big capacity, or data safety provided by different RAID functions. Here, we will use four SATA hard disks as an example to guide you how to select your RAID system.
  • Page 75 MediaShield BIOS Jul 27 2007 - Define a New Array - Optimal RAID Mode: Mirrored Striped Stripe Block: Optimal Free Disks Array Disks Port Disk Model Capacity Port Disk Model Capacity 0.0 WDC WD1200JD-9 111.79GB 0.0 WDC WD1200JD-9 111.79GB 0.2 Hitachi HDT725 232.88GB 0.1 HDS728080PLA38 76.69GB [+] Add...

  • Page 76: Create Raid Driver Diskette

    5-1 Create RAID Driver Diskette If you want to install a brand new Windows XP on a RAID system, you need to create a RAID driver floppy diskette which will be used during Windows XP installation later. 1. Find a PC, put a diskette into its floppy drive A:, this diskette will be formatted later. Put the driver CD into your DVD-ROM drive and go to Driver\Common\RAID, click on RAIDflpy.txt.
  • Page 77 7. You can input a volume label for this diskette, click on "Start" to format. 8. Click on "OK" to go through this warning message. 9. Format finished. Click "OK", then click "Close" to continue copying of RAID driver into this diskette.

  • Page 78: Raid Enable In Bios

    5-2 RAID enable in bIoS 1. Enter the BIOS setup by pressing [DEL] key when boot up. 2. Select the “Integrated Peripherals” from the “Main menu”, then select the “RAID Config” menu and press [Enter] to go to the configuration items. 3.

  • Page 79: Create Raid 0 (Striped)

    Create RAID 0 (Striped) 1. Select "Striped" from the RAID Mode. The menu appears : MediaShield BIOS Jul 27 2007 - Define a New Array - Optimal RAID Mode: Mirrored Stripe Block: Optimal Striped Free Disks Array Disks Port Disk Model Capacity Port Disk Model Capacity...
  • Page 80 4. The stripe value should be selected based on different applications. It ranges from 4KB to 128KB. Some suggested choices are : 16K - Best for sequential transfer. 64K - Good general purpose strip size. 128K - Best performance for most desktops and workstations. Keep it at Optimal default value.
  • Page 81 6. The screen displays a STRIPE array of 153.38GB, which is twice the size of the smallest hard disk. That is, 2*76.69GB = 153.38GB. If you want to build a new Operating System (such as Windows XP) in this RAID system, please press [B] to select it as bootable.

  • Page 82: Create Raid 1 (Mirrored)

    Create RAID 1 (Mirrored) 1. Select “Mirrored” from the RAID Mode. MediaShield BIOS Jul 27 2007 - Define a New Array - Optimal RAID Mode: Mirrored Stripe Block: Optimal Mirrored Free Disks Array Disks Port Disk Model Capacity Port Disk Model Capacity 0.0 WDC WD1200JD-9 111.79GB 0.0 WDC WD1200JD-9 111.79GB...
  • Page 83 4. The stripe block value is fixed and not changeable. Press [F7] to finish the setting. MediaShield BIOS Jul 27 2007 - Define a New Array - Optimal RAID Mode: Mirrored Mirrored Stripe Block: Optimal Free Disks Array Disks Port Disk Model Capacity Port Disk Model Capacity...
  • Page 84 6. The screen displays a MIRRORED array of 232.88GB, which is the size of the smallest hard disk. That is, 232.88GB. If you want to build a new Operating System (such as Windows XP) in this RAID system, please press [B] to select it as bootable. You can then press [Ctrl]+[X] keys to exit the setup program, and restart your PC.
  • Page 85 Create RAID 0+1 (Striped Mirror) 1. Select “Striped Mirror” from the RAID Mode. The menu appears : MediaShield BIOS Jul 27 2007 - Define a New Array - Optimal RAID Mode: Mirrored Stripe Block: Optimal Striped Mirror Free Disks Array Disks Port Disk Model Capacity Port Disk Model...
  • Page 86 4. The stripe value should be selected based on different applications. It ranges from 4KB to 128KB. Some suggested choices are : 16K - Best for sequential transfer. 64K - Good general purpose strip size. 128K - Best performance for most desktops and workstations. Keep it at Optimal default value.
  • Page 87 6. The screen displays a RAID 0+1 array of 153.38GB, which is twice the size of the smallest hard disk. That is, 2*76.69= 153.38GB. If you want to build a new Operating System (such as Windows XP) in this RAID system, please press [B] to select it as bootable.

  • Page 88: Create Raid

    Create RAID 5 1. Select “RAID5” from the RAID Mode. The menu appears : MediaShield BIOS Jul 27 2007 - Define a New Array - Optimal RAID Mode: Mirrored RAID5 Stripe Block: Optimal Free Disks Array Disks Port Disk Model Capacity Port Disk Model Capacity...
  • Page 89 4. The stripe value should be selected based on different applications. It ranges from 4KB to 128KB. Some suggested choices are : 16K - Best for sequential transfer. 64K - Good general purpose strip size. 128K - Best performance for most desktops and workstations. Keep it at Optimal default value.
  • Page 90 6. The screen displays a RAID5 array of 153.38GB, which is twice the size of the smallest hard disk. That is, 2*76.69= 153.38GB. Another hard disk is used for parity check. If you want to build a new Operating System (such as Windows XP) in this RAID system, please press [B] to select it as bootable.

  • Page 91: Create Spanned Raid

    Create Spanned RAID 1. Select “Spanned” from the RAID Mode. The menu appears : MediaShield BIOS Jul 27 2007 - Define a New Array - Optimal RAID Mode: Mirrored Stripe Block: Optimal Spanned Free Disks Array Disks Port Disk Model Capacity Port Disk Model Capacity...
  • Page 92 4. The stripe block value is fixed and not changeable. Press [F7] to finish the setting. MediaShield BIOS Jul 27 2007 - Define a New Array - Optimal RAID Mode: Mirrored Spanned Stripe Block: Optimal Free Disks Array Disks Port Disk Model Capacity Port Disk Model Capacity...
  • Page 93 6. The screen displays a Spanned RAID array of 421.36GB, which is the total sizes of these three hard disks. That is, 111.79+76.69+232.88= 421.36GB. We recommend not setting it to bootable as it will be impossible to recover if crashed. You can then press [Ctrl]+[X] keys to exit the setup program, and restart your PC.

  • Page 94: Install A New Windows Xp

    Creating a Bootable Array- Install a New Windows XP Assume a Mirrored array (232.88GB) was created as introduced in section 5-3, after the system restarts : 1. Press [DEL] to enter BIOS Setup during POST. 2. Insert the Windows installation CD into the optical drive. 3.
  • Page 95 5. After some files are copied to your system, the following picture appears, press [S] to continue the specific driver installation. Windows Setup Setup could not determine the type of one or more mass storage devices installed in your system, or you have chosen to manually specify an adapter. Currently, Setup will load support for the following mass storage device(s): <none>...
  • Page 96 7. There are two drivers, all these two drivers must be installed. Press [Enter] to select the first driver - "NVIDIA RAID Driver (required)". Windows Setup You have chosen to configure a SCSI Adapter for use with Windows, using a device support disk provided by an adapter manufacturer. Select the SCSI Adapter you want from the following list, or press ESC to return to the previous screen.
  • Page 97 9. Use [↓] key to select "NVIDIA nForce Storage Controller (required)", then press [Enter]. Still, The RAID floppy diskette 1 is inside the floppy drive. Windows Setup You have chosen to configure a SCSI Adapter for use with Windows, using a device support disk provided by an adapter manufacturer. Select the SCSI Adapter you want from the following list, or press ESC to return to the previous screen.
  • Page 98 11. Windows will display the partition of your system. As we are using a Mirrored RAID array as an example, its size 232.88GB is now displayed as 238473MB. You can press [C] to create partitions as many as you wish, assign them C:, D: or E: logical drive names.
  • Page 99 13. The Windows XP install processes will ask you to format your hard disk, select quick formatting using NTFS file system, press [ENTER]. Windows XP Professional Setup The partition you selected is not formatted. Setup will now format the partition. Use the UP and DOWN ARROW keys to select the file system you want, and then press ENTER.
  • Page 100 15. After Setup copies files from RAID floppy diskette 2 to the Windows installation folders, it then will ask you to insert the first RAID diskette into floppy drive again. Press [Enter] to continue when it is done. Windows Setup Insert the disk labeled : NVIDIA RAID DRIVER (SCSI) disk 1 into drive A:...

  • Page 101: Setting Up A Non-Bootable Raid Array

    5-5 Setting Up a Non-Bootable RAID Array This section assumes the following setup : ■ Boot Disk with Windows XP installed : One hard disk HDS728080PLAT20 (80GB) is connected to the IDE channel, and set to Master. ■ A Mirrored RAID Array Disk : Two SATA hard disks are configured as a mirrored RAID1 array, they are : Hitachi HDT725025VLA, (232.88GB) connected to SATA port2 of the motherboard.
  • Page 102 2. Select a RAID array for use (also can refer to section 5-3) After rebooting your computer, you will see the RAID software prompting you to press [F10]. Press [F10] to enter the NVIDIA MediaShield BIOS setup and configure the mirrored RAID array as described in the 5-3 section.
  • Page 103 5. The installation of driver may take a while, after the NVIDIA driver is installed, it will ask you to click "Finish" to restart your computer. 6. When Windows starts, a "Found New Hardware Wizard" appears. Click on "Cancel" to ignore it.
  • Page 104 7. After PC starts, the RAID array is now ready to be initialized under Windows. Launch Computer Management by clicking Start -> Settings -> Control Panel then open the Administrative Tools folder and double click on Computer Management. Click Disk Management (under the Storage section). The Initialize and Convert Disk Wizards appears.
  • Page 105 11. The Computer Management window appears. The actual disks listed will depend on your system. In below figure, you can see there is a 232.88 GB unallocated partition. You must format the unallocated disk space before using it. Right click "Unallocated space", select "New Partition…" and follow the Wizard instructions.
  • Page 106 17. The format of disk array (Disk1) is in processing. 18. Format completed, now you can start using your RAID array.

This manual is also suitable for:

M61pmp

Table of Contents