Memory Configuration - Foxconn M61PMP-K User Manual

► OnChip VGA Frame Buffer Size
Allocates system memory for use as video memory to ensure the most efficient use of avail-
able resources for maximum 2D/3D graphics performance.
This is a memory allocation method addition to the Unified Memory Architecture (UMA)
concept, wherein a static amount of page-locked graphics memory is allocated during driver
initialization. This fixed amount of memory will provide the user with a guaranteed graphics
memory at all times, and will no longer be available to the OS.

Memory Configuration

Memory Configuration
Enable Clock to All DIMMS
Memory Hole Remapping
DCT Unganged Mode
↑↓←→:Move Enter:Select
► Enable Clock to All DIMMs
This setting is to control EMI.
When disabled, the system will turn off clock on the empty DIMM slots to reduce EMI(Electro-
Magnetic Interface).
► Memory Hole Remaping
This item is used to enable/disable memory remapping around memory hole. PCI doesn't actu-
ally care much which addresses are used, but by convention the PC platform puts them at the
top of the 32-bit address space. For many years it wasn't possible or practical to put that much
RAM into a PC. But now it is, so it's up to the memory controller and host bridge to figure out
what to do. Many systems cause that high RAM to simply be ignored, resulting in the loss of
effective RAM. More complex systems will take the RAM that would occupy that 3.5-4GB
address space and re-map it into the 4.0-4.5 address space. The RAM doesn't care because
it's just an array of storage cells, it's up to the memory controller to associate addresses with
those storage cells. Of course, that only works if you're using a 64-bit (or 32-bit physical ad-
dress extension (PAE) enabled) OS that can deal with physical addresses larger than 32 bits.
Once this option is enabled, the BIOS can see 4096MB of memory.
► DCT Unganged Mode
DCT stands for DRAM Controller.
Ganged refers to the use of both DRAM controllers within a memory controller acting in con-
cert to access memory. For a description of ganged (128-bit DRAM data width) and unganged
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
Memory Configuration
+/-/:Value
F9:Optimized Defaults
[Disabled] Enable unused clocks to
[Enabled] DIMMs even when memory
[Always] slots are not populated.
F10:Save ESC:Exit
27
Help Item
F1:General Help