Foxconn M61PMP-K User Manual page 102

2. Select a RAID array for use (also can refer to section 5-3)
After rebooting your computer, you will see the RAID software prompting you to
press [F10].
Press [F10] to enter the NVIDIA MediaShield BIOS setup and configure the mirrored
RAID array as described in the 5-3 section. Finally, you can reach this step as
depicted.
[Ctrl-X] Exit
3. Press [Ctrl]+[X] keys to exit and go to Windows.
4. In Windows, click "Cancel" to skip any "Found New Hardware Wizard".
Use driver CD and click on "NVIDIA MCP61 Chipset Driver" to install the NVIDIA
RAID driver. The RAID driver can be installed only when you select [Enable] in BIOS
"RAID Enable" setting. If you do not select [Enabled], then RAID driver can not be
installed.
MediaShield BIOS Jul 27 2007
- Array List -
Boot Status Vendor
Healthy NVIDIA
[↑↓] Select [B] Set Bootable
95
Array Size
MIRROR 232.88G
[N] New Array [ENTER] Detail