4. The stripe value should be selected based on different applications. It ranges from
4KB to 128KB. Some suggested choices are :
16K - Best for sequential transfer.
64K - Good general purpose strip size.
128K - Best performance for most desktops and workstations.
Keep it at Optimal default value. Press [F7] to finish the setting.
RAID Mode: Mirrored
Free Disks
Port Disk Model
0.2 Hitachi HDT725
0.3 ST3320620AS
0.3 ST3320620AS
[ESC] Quit
5. Press [Y] to continue, and press [Y] again to select "Clear MBR".
RAID Mode: Mirrored
Free Disks
Port Disk Model
0.2 Hitachi HDT725
0.3 ST3320620AS
0.3 ST3320620AS
[ESC] Quit
MediaShield BIOS Jul 27 2007
- Define a New Array -
Striped
Capacity
All data on new (or added) disks will be overwritten. Continue?
232.88GB
298.09GB
298.09GB
[+] Add
[Y] YES [N] NO
[-] Del
[F6] Back
[F7] Finish
[TAB] Navigate
MediaShield BIOS Jul 27 2007
- Define a New Array -
Striped
Capacity
232.88GB
Clear MBR?
298.09GB
298.09GB
[+] Add
[Y] YES [N] NO
[-] Del
[F6] Back
[F7] Finish
[TAB] Navigate
Optimal
Stripe Block:
Optimal
Array Disks
Port Disk Model
0.0 WDC WD1200JD-9 111.79GB
0.0 WDC WD1200JD-9 111.79GB
0.1 HDS728080PLA38 76.79GB
[↑↓] Select
Optimal
Stripe Block:
Optimal
Array Disks
Port Disk Model
0.0 WDC WD1200JD-9 111.79GB
0.0 WDC WD1200JD-9 111.79GB
0.1 HDS728080PLA38 76.69GB
[↑↓] Select
73
Capacity
[ENTER] Popup
Capacity
[ENTER] Popup